Product Manual

Owner’s Manual for Tow-Behind Field and Brush Mower 19
Maintenance and Troubleshooting
Section 4: Maintenance and Troubleshooting
Maintenance
Regular maintenance will improve performance and extend
engine/equipment life. Regular maintenance, replacement,
or repair of the emissions control devices and systems may
be performed by any repair shop or person of the owner’s
choosing. To obtain emissions control warranty service free
of charge,
contact Generac Customer Service at 1-888-
436-3722 (1-888-GENERAC), or www.generac.com
.
See the emissions warranty.
WARNING
(000415)
Accidental start-up. Before servicing or detangling, shut
down unit, allow to cool, remove keys, and disconnect spark
plug wire(s). Failure to do so could result in death, serious
injury, or equipment damage.
WARNING
(000400)
Personal injury. Mower blades are extremely sharp. Use
appropriate personal protective equipment when handling
and servicing blades, or use blade protection. Failure to do
so could result in death or serious injury.
(000108)
WARNING
Hot Surfaces. When operating machine, do not
touch hot surfaces. Keep machine away from
combustibles during use. Hot surfaces could
result in severe burns or fire.
Procedure Before Each Use Every 25 Hours Every 100 Hours
Check engine oil level

Inspect general equipment condition

Check blade sharpness

Clean engine exterior and cooling fins

Check cable connections

Check tire pressure on rear wheels

Change engine oil and filter 1st time 5 hours

Replace air filter

Lubricate wheel bearings

Lubricate height adjustment threads

Check drive belt condition

Replace spark plug(s)

Replace fuel filter
