Product Manual

Owner’s Manual for Tow-Behind Field and Brush Mower 5
General Information and Setup
Section 2: General Information and Setup
005815
A
B
E
D
H
C
A Hand Crank Height
B Electric Start Key
C Throttle
D Oil Filter
E Muffler
F Generac G-Force Engine
G Fuel Fill
H Tow B a r
I Blade Disengage Switch
J
K
L
M
N
Oil Fill
Fuel Filter
Oil Drain
Fuel Shut-Off
Chain Debris Guard
F
G
I
J
K
L
M
Tow-Behind Field and Brush Mower Specifications
Battery 9 Ah
Wheels
Front: 11 X 4-5, Flat Free
Rear: 13 x 5-6, Lugged with Tube
Tether Length 14.42 ft (4.4 m)
Distance
Centerline to
Cutting Edge
68 in (172.72 cm) Full Offset
49.5 in (125.73 cm) Mid Offset
Offset Positions 5
Cutting Height 4 in (10.16 cm) to 7.5 in (19 cm)
Cutting Width 44 in (111.76 cm)
Cutting Capacity
6 ft (1.83 m) High Grass
8 ft (2.44 m) High Weeds and Brush
3 in (7.62 cm) Thick Saplings
Blade Tip Speed 18,500 - 19,000 ft/min
Blades
Break Away and Swing, Heavy Duty Brush
Deck 12 GA Welded Steel
Discharge Rear
Spindle
1.375 in (3.493 cm) Dia. Shaft with 2
Sealed 30 mm Bearings
Belt B49
Electric Clutch 95 ft-lb (128.8 Nm)
Fuses
20 AMP Type AGC Fuse (Alternator )
7 AMP Type AGC Fuse (Clutch)
Max Speed 5 mph (8 km/h)
Torque Weight 10 lb (4.5 kg)
Machine
Dimensions
146 in (370.8 cm) L x 46.5 in (118.1 cm)
W x 32.5 (82.6) T
Machine Weight 401 lb (182 kg)
A complete specification sheet is included in the
documentation provided with the unit at the time of
purchase. For additional copies, contact Generac
Customer Service at 1-888-436-3722 (1-888-GENERAC)
or www.generac.com.
Engine Specifications
Engine Generac G-Force
Starting System Electric Start
Fuel Capacity 2.5 gal (9.46L)
Oil Capacity 54.1 oz (1.6 L)
Oil Type
See chart in
Adding Oil.
Spark Plug TORCH F7RTC or equivalent
Spark Plug Gap .024-.032 in (0.6-0.8 mm)
N