Replacement Part List

Step 3 CONNECT THE VOLTAGE CABLE

Connect the black and red wires to a 2 pole 15A or

20A circuit breaker. The black wire should go to Phase

A and the red to Phase B. Connect the white wire to

the neutral bus bar usually located next to the breaker

OFF

Black Wire

Red Wire

White Wire

NOTE: The blue wire

is only needed when

connecting a CT to Port

3, which is not used in a

2-phase, consumption only

installation. If the blue wire

is not needed, twist the

wire nut onto the blue wire.

For more installation types,

visit www.generac.com/

service-support/PWRview