Replacement Part List
When powered on, PWRview will play the following tones to indicate its status in sequential order:
TONE INDICATION DESCRIPTION
Short beeps
Voltage check
One beep for each voltage wire that is
connected. For a 2-phase installation there
should be two beeps to indicate that the black
and red wires are connected.
Short chime
PWRview’s WiFi
network started
PWRview has started hosting its own WiFi
network. You can join this network to configure
PWRview and connect it to your own WiFi
network.
Long beep
Voltage warning
(conditional)
Indicates that two wires are connected to the
same phase. For North American apartments,
this means that one of PWRview’s wires should
be moved to a dierent breaker. This tone can
be ignored for all other 2-phase installations.
Long chime
PWRview
joined network
successfully
PWRview successfully joined your WiFi network
Falling tone
PWRview failed to
join network
PWRview was unable to join your WiFi network.
PWRview will now start hosting its own WiFi
network again to allow you to re-connect to
PWRview and re-enter the WiFi credentials