User's Manual Part 1

Node B Rack Mount Installation Guide

Version 0.0.3 Page 14 of 39

Step 2 Parts Shipped & Tools Required

This section reviews the parts, ancillary materials and tools required to install the Node B.

Use this checklist (Table 6-1) to check quantity and quality of parts as they are unpacked: -

The Node B unit is packaged with the following items, the packing list on the inside top of the

packing shall list these items.

The crate Figure 5-1 contains two cartons the top/first carton is the digital or baseband shelf,

the bottom is the RF or radio shelf. The carton is packed to facilitate the intended sequence

of installation. The figure below shows the sequence of removal from the packing.

Table 6-1 : Packing List

# Description Qty

Digital Shelf Package - contents

1 Node B Digital/Baseband Shelf Unit 1

2 GPS Antenna Kit incl Mounting

contains:

1 x gps antenna

1 x gps antenna mounting

3 Alarm Connector Kit

contains:

1 x 15wayD conn+backshell

1 x 9wayD conn+backshell

4 Shelf Interface Kit

contains

1 x Baseband cable – 21wayD-hybrid

1 x Control Cable – 25wayD

1 x PSU control cable – 3way

5 Power Connection Kit-Digital

contains

1 x power connection – digital

6 Earth Fixing Kit

contains:

1 x M8 Nut

1 x M8 Spring Washer

2 x M8 Plain Washer

Radio Shelf Package

1 Radio Shelf Unit 1

2 Power Connection Kit-Radio

contains

1 x power connection – radio

3 Earth Fixing Kit

contains:

1 x M8 Nut

1 x M8 Spring Washer

2 x M8 Plain Washer