Installation Guide

Node B Installation Guide
Version 5.0.0 Page 18 of 37
Securing Bracket to Wall - Uneven Wall
To mount the bracket for an uneven wall the following materials are required:-
1. 2 pieces of P1000 HS x 14" Stainless Steel Unistrut™ Channel- locally supplied
2. 4off P1007 - 5/16”-18 UNC channel nuts with springs from Unistrut™ - locally supplied
3. 4off 5/16” x 1” – Hex Head Cap Screw Stainless Steel - Unistrut™ PN: HSHS031100EG
or equivalent - locally supplied
4. 4off 5/16” – Plain washer Stainless Steel - Unistrut™ PN: HFLW031EG or equivalent -
locally supplied
5. 4off 5/16” - Lock washer Stainless Steel - Unistrut™ PN: HFKW031EG or equivalent -
locally supplied
6. 4off M8x55L Rawlok Loose bolt or equivalent (eg. Hilti anchor bolts) - locally supplied
7. Drill & Masonary Drill Bit
The following diagram illustrates the installation using the Unistrut method:- the drill template
can be used to position the drill holes
Figure 6-6: Node B Securing to Uneven Wall
4off M8 Wall anchor bolts
2off - 360mm (14inch) Unistrut channel
+
4off - Unistrut channel nuts w spring
Node B Bracket