P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem NOTICE Information in this document and the products described are subject to change without notice. IP Wireless offers this manual with no warranty, either explicit or implied. Reproduction, alteration, or distribution in any manner whatsoever without the written permission of IPWireless Inc., is strictly forbidden. Trademarks used in this text: the IPWireless logo, icon, and Wireless Broadband Modem are trademarks of IPWireless, Inc.
P1D Wireless Broadband Modem User Manual CONTENTS SECTION 1 – INTRODUCTION 5 Safety Guidelines for Power Connection Safety Guidelines for the P1D Wireless Broadband Modem Exposure to Radio Frequency Signals Care and Cleaning Guidelines Pack Contents 5 5 6 6 7 SECTION 2 – GETTING STARTED Key Areas on Your Wireless Broadband Modem Required Equipment USB Cable Connection Ethernet LAN Cable Connection Perform Registration Microsoft Windows Operating System Patches Windows Internet Configuration Setting
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Do not expose the P1D Modem to open flames. Section 1 – Introduction Before using your Wireless Broadband Modem for the first time, please read and follow all warnings, safety, care, cleaning and operating instructions on the Wireless Broadband Modem label and in this guide. These guidelines will help protect your Wireless Broadband Modem from potential damage and ensure your personal safety.
P1D Wireless Broadband Modem User Manual Avoid dropping, shaking or striking the P1D Modem. This may damage its components. Never remove the battery or the SIM/USIM card (if fitted) whilst the P1D Wireless Broadband Modem is powered on, this may cause misoperation of the unit and damage to the SIM/USIM card Pack Contents P1D Wireless Broadband Modem User Manual Section 2 – Getting Started Key Areas on Your Wireless Broadband Modem Figure 1 below identifies key areas on the P1D Modem.
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Required Equipment Z Signal strength indicators These two green indicators show signal level. They are off when there is no signal present. They will flash together when a signal is detected from the network during the connection stage of accessing the network. Once connected they will be steady.
P1D Wireless Broadband Modem User Manual Section 3 – Installation and Registration This chapter explains how to install the hardware, software, register your user information, and operate your P1D Wireless Broadband Modem. The instructions are split into the following sub-sections: P1D Wireless Broadband Modem User Manual Note: Before connecting your P1D Modem to a power source, you may want to consider using a power surge protector.
P1D Wireless Broadband Modem User Manual 2. The Modem will ‘search’ for a base station, in a manner similar to a cellular phone. Whilst the modem is searching, the Connect indicator on the top panel will flash. When the Modem is connected the indicator will become steady. You are now ready to install the Connection Software. Note: Install the Connection Software before connecting the Computer Interface Cable.
P1D Wireless Broadband Modem User Manual The only requirements are that you have a default browser installation, and that your browser is capable of accepting ‘cookies’. If you have disabled cookies, you need to enable them before registration. If you wish, you may disable receipt of cookies after registration. See Frequently Asked Questions (FAQs) in Appendix C for instructions on how to set cookie preferences on your browser. 1.
P1D Wireless Broadband Modem User Manual Section 4 – Connect to the Internet The Connection Software is used in conjunction with your P1D Wireless Broadband Modem to connect to the Internet. This section describes how the Connection Software is used to initiate the connection, and also how it may be used to download software upgrades for your Modem and Connection Software from the Service Providers web site.
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Fully charged. The P1D Modem will operate the maximum possible time available from the battery. Establishing the Connection to the Internet Unable to obtain the charge level from the Modem. Start the Connection Software and wait until the signal strength indicator on the Network tab indicates that there is sufficient signal strength for the connection.
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Appendix A – Troubleshooting Tips b) If this is the first time you have tried to use the Modem and you do not see any signal strength LEDs illuminated, try repositioning the modem to see if the signal strength indicator illuminates. If you still cannot obtain a signal, try moving the modem near to a window. The Modem is receiving an adequate signal when the signal strength indicators are illuminated.
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual You may be accessing a slow web site. A web site can cause a traffic jam on the Internet's backbone because many people converge on it at once or that site's server does not have the capacity to handle its traffic. In these cases, it does not matter what speed your modem can achieve. Tip: Surf these sites when Internet traffic is low. Heaviest traffic is usually on weekends and evenings.
P1D Wireless Broadband Modem User Manual c) The ISP’s server does not allow more than one simultaneous connection to the network with the same username and password. Do not share your username and password with other Wireless Broadband Modem users. d) If you cannot correct the problem, call your Service Provider for Technical Support. 14. Error Message “No Answer” On rare occasions, the server will not receive the message advising it that the previous session has ended.
P1D Wireless Broadband Modem User Manual Appendix C – Frequently Asked Questions Q. WHERE CAN I FIND A COVERAGE MAP? A. Contact your Service Provider. Q. HOW DO I CHANGE MY SERVICE LEVEL? P1D Wireless Broadband Modem User Manual A. Using Netscape Navigator: Click on the Options menu and select General Preferences. Select the Appearance tab. In the Startup box, type in the address of the web page you want to use as your home page. Click OK. Q. HOW WILL I KNOW WHEN TO UPGRADE MY PC SOFTWARE? A.
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Q. HOW DO I INSTALL MY MODEM ON A DIFFERENT COMPUTER? A. If you have already installed your modem on ONE PC and wish to use it on a SECOND PC or laptop, insert the Installation CD into the second PC and run the installation software. You will automatically connect to the registration web pages. Select ‘Support Services’. You may modify your settings here, if needed.
P1D Wireless Broadband Modem User Manual Appendix E – [Technical Specifications] P1D Wireless Broadband Modem User Manual Frequency of operation ......................................... 1.9 to 2.69 GHz in 4 versions Impedance: ............................................................................ 50 ohms nominal Omni-directional gain: ............................................................................. 2.5dBi Polarization: ...................................................................
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Appendix F – [PPPoE Routers Tested] Appendix G – [PPPoE Clients Tested] The Wireless Broadband Modem has been tested on and found to be compatible with the following PPPoE hardware routers. The Wireless Broadband Modem has been tested on and found to be compatible with the following PPPoE software clients.
P1D Wireless Broadband Modem User Manual P1D Wireless Broadband Modem User Manual Appendix H – Error Messages The Connection Software displays error messages when a problem occurs. There are two main categories of error messages that can be displayed by the Connection Software Microsoft Remote Access Service (RAS) Errors, and Wireless Broadband Modem Extended Errors. For both categories, the error message is always displayed within the Connection progress region on the ISP tab.
P1D Wireless Broadband Modem User Manual Microsoft Remote Access Service (RAS) Error Codes The following is a list of known RAS Error Codes and associated error message. The RAS error text will be displayed if a RAS error occurs whilst attempting to either connect to the internet, whilst connected to the internet or when disconnecting from the internet.
P1D Wireless Broadband Modem User Manual 701 The device moved to a BPS rate not supported by the COM driver. 702 Device response received when none expected. 703 ERROR INTERACTIVE MODE 704 ERROR BAD CALLBACK NUMBER 705 ERROR INVALID AUTH STATE 706 ERROR WRITING INITBPS 707 X.25 diagnostic indication. 708 The account has expired. 709 Error changing password on domain. 710 Serial overrun errors were detected while communicating with your modem. 711 RasMan initialization failure. Check the event log.
P1D Wireless Broadband Modem User Manual Error Message Cause Recovery Action Disconnected by service provider This can occur for two reasons: The recovery actions for the specific causes are as follows Session establishment should be re-attempted. 1) This is normally seen when attempting to establish an internet session and gain access to your ISP with an invalid ID. This only affects modems that have a SIM card present.
P1D Wireless Broadband Modem User Manual Error Message Cause Recovery Action Loss of coverage – please improve modem signal The modem can no longer communicate with the wireless network. The modem will automatically try and regain radio coverage/synchronization with the wireless network.
P1D Wireless Broadband Modem User Manual Regulatory Information P1D User Manual MPE limits. The modem should not be co-located with any other transmitters during use. North America and Canada Your Wireless Broadband Modem may cause TV or radio interference (e.g., when using the modem in close proximity to a TV or radio receiver). The FCC/Industry Canada can require you to stop using the modem if such interference cannot be eliminated.
P1D User Manual Europe Statements of Conformity English Hereby, IPWireless Inc, declares that this Wireless Broadband Modem Model: XX is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Deutsch Hiermit erklärt IPWireless Inc, dass sich dieses Wireless Broadband Modem Model: XX in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet".