User's Manual

NOTE

When external power is properly applied, the External Power LED lights.

CAUTION

This notebook computer is designed to be used with the provided dedicated AC Adapter or Vehicle

Adapter only

To Attach AC Power:

Using the (optional) Office Dock

1. Insert the Office Dock into the back of the

computer.

2. Insert the power suppy cord into the DC-in jack on

the right side of the dock.

3. The power LED illuminates to indicate that current

is reaching the computer. When you connect the

Office Dock it automatically begins charging the

computer’s battery. At ambient temperature, (room

temperature of about 70ºF), the battery should

charge from empty to 90% in less than three hours

if the unit is suspended or off. It should take less

than four hours if the unit is in use.

Using the (optional) Vehicle Adapter

1. Insert the vehicle adapter’s power cord into the

DC-in jack on the left side of the computer.

2. Insert the 12V (cigarette lighter) adapter into the vehicle’s 12V socket, turning it slightly to make a good

connection.

1. If the computer has a dust cover over the back edge

connections, pull it back and rotate it to the side.

2. Connect the AC adapter power cord to the AC

adapter.

2. Connect the AC adapter to the DC power port on

the back of your computer.

NOTE

Push the DC jack firmly into the

computer until it “clicks.”

2. Connect the AC adapter power cord to a properly

grounded AC outlet.

NOTE

It is recommended you use a quality surge

protector.

e 31 of 90GoBook M

-1

6/18/2008file://C:\Documents and Settin

s\harwoodm\Local Settin

s\Tem

\~hh96AE.htm