User's Manual

ensure that the accessory functions properly in your computer before making the purchase. Your system vendor may

be able to recommend reliable brands and models.

Expansion Module (Option)

The Expansion Modules add functionality to the GoBook MR-1. Initially

available will be an expansion module that adds a USB 2.0 port, 9-pin

Serial port and TPM 1.2 (and it can include an additional 80GB Hard-

drive to replace the standard 40GB internal drive).

NOTE

The Expansion Modules cannot be installed by the customer.

Please contact your GoBook MR-1 Distributor for units and installation.

Hard Drive Installation and Removal

If you have a Expansion Module installed on your GoBook MR-1, the

hard drive is accessible from the back of the unit.

To remove the hard drive:

To insert a hard drive:

1. Hold the computer in both hands and turn over so

you are looking at the bottom with the battery latch

at the back of the unit in your right hand.

2. Place your thumbs on the battery latches on the

either edge of the battery and press in. Remove by

pushing in the direction of the arrows

3. Lift the battery away from the unit.

1. Hold the GoBook MR-1 as shown and press in

with the finger of your right hand on the latch

next to the hard drive (see circle in illustration)

until you hear it click.

2. Use the thumb on your left hand to slide out the

hard drive.

3. Once the drive is projecting from the GoBook

MR-1, grasp it gently and pull it straight out of

the unit.

1. Place the hard drive in the slot on the GoBook

MR-1 and slide it in straight and slow.

e 69 of 90GoBook M

-1

6/18/2008file://C:\Documents and Settin

s\harwoodm\Local Settin

s\Tem

\~hh96AE.htm