User's Manual
Table Of Contents
- Notices, Compliance and Safety
 - Getting Started
 - Getting Familiar With Your Computer
- Front View
 - Left Side View
 - Right Side View
 - Back Edge View
 - Bottom View
 - Keyboard Basics
 - Radio ON/OFF Switch (option)
 - Application Launch Key
 - Touch Screen Display
 - Lid Switch
 - LED Status Indicators
 - Audio
 - The PC Card Slot
 - Touchpad
 - Smart Card or EXPRESS Card Slot (option)
 - The Hard Disk Drive (HDD)
 - The Media Bay
 - Computer Security
 - Ports and Connectors
 - ENERGY STAR®
 
 - Making Connections
 - Wireless Communication
 - Operating with Battery Power
 - Customizing Your BIOS
 - Optional Equipment and Accessories
 - Maintenance and Storage
 - Service and Support
 - Troubleshooting
- Application Troubleshooting
 - Battery Troubleshooting
 - Display / Touch Screen
- The display performance is slow
 - I can’t read the display
 - The underlined, inverse, and hypertext characters are difficult to read on the screen
 - I can’t see the cursor while using the DOS editor
 - I changed my display resolution, but I see no difference on the screen
 - Nothing happens when I try to use the stylus on my touch screen
 - The touch screen doesn’t respond after a suspend
 
 - Hard Disk
 - Keyboard and Mouse Troubleshooting
 - Modem Troubleshooting
 - PC Cards
 - Miscellaneous Troubleshooting
- The computer shuts off unexpectedly
 - The speaker volume is too high or too low
 - The computer won’t turn on
 - The computer won’t turn off
 - The computer enters suspend mode too quickly
 - The computer doesn’t automatically suspend
 - The system date and time are incorrect
 - I receive an “out of memory” error message
 - Holding down the Power button to reset the computer doesn’t always work
 - The computer doesn’t make any sounds, even during boot-up
 - The fan stopped running
 - Can I improve the startup speed of my programs by cleaning up and rearranging files on the hard drive?
 
 
 
General Dynamics Itronix | 72-0137-001 
GD8000 User Guide
Notices, Compliance and Safety
company will provide advance notice in order for you to make 
the necessary modifications in order to maintain uninterrupted 
service.
If trouble is experienced with this equipment, please contact 
the equipment manufacturer for repair and/or warranty 
information. Do not attempt repairs of this equipment 
yourself without obtaining manufacturer authorized parts and 
documentation. If the trouble is causing harm to the telephone 
network, the telephone company may request you remove the 
equipment from the network until the problem is resolved.
Compliance Statement for Canada
NOTICE The Industry Canada label identifies certified 
equipment. This certification means that the equipment meets 
certain telecommunications network protective, operational 
and safety requirements as prescribed in the appropriate 
Terminal Equipment Technical Requirements document(s). The 
Department does not guarantee the equipment will operate to 
the user’s satisfaction.
Before installing this equipment, users should ensure that 
it is permissible to be connected to the facilities of the local 
telecommunications company. The equipment must also 
be installed using an acceptable method of connection. The 
customer should be aware that compliance with the above 
conditions may not prevent degradation of service in some 
situations.
Repairs to certified equipment should be made by a 
representative designated by the supplier. Any repairs or 
alterations made by the user to this equipment, or equipment 
malfunctions, may give the telecommunications company 
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical 
ground connections of the power utility, telephone lines, and 
internal metallic water pipe system, if present, are connected 
together. This precaution may be particularly important in rural 
areas.
CAUTION Users should not attempt to make such 
connections themselves, but should contact the appropriate 
electric inspection authority, or electrician, as appropriate.
The Ringer Equivalence Numbers (REN) are:
GD8000 non-radio: 0.5B
NOTICE The Ringer Equivalence Number (REN) assigned to 
each terminal device provides an indication of the maximum 
number of terminals allowed to be connected to a telephone 
interface. The termination on an interface may consist of any 
combination of devices subject only to the requirement that the 
sum of the Ringer Equivalence Numbers of all the devices does 
not exceed 5.
The GD8000 computer may be connected to the telephone 
network using the RJ-11 jack provided.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it 
unlawful for any person to use a computer or other electronic 
device to send any message via a telephone fax machine 
unless such message clearly contains in a margin at the top 
or bottom of each transmitted page or on the first page of the 
transmission, the date and time it is sent and an identification 
of the business or other entity, or other individual sending the 
message and the telephone number of the sending machine or 
such business, other entity, or individual.
In order to program this information into your fax machine, you 
should complete the following:
This information is entered through the FAX application 
software you have installed. Consult your FAX software 
documentation for instructions about entering this information.
Warnings and Cautions
WARNING It is important that only authorized personnel 
service and attempt repairs on the equipment. Unauthorized 
service or repair may void the warranty and any maintenance 
contract in effect for the equipment. Unauthorized service 
personnel might be subject to shock hazard on some 
equipment if removal of protective covers is attempted.
There is danger of explosion if the battery is incorrectly 
replaced. Replace only with the same or equivalent type 
recommended by the manufacturer.  Dispose of used batteries 
according to the manufacturer’s instructions.
The product you have purchased is powered by a rechargeable 
battery. The battery is recyclable and, under various state and 
local laws, it may be illegal to dispose of this battery into the 
municipal waste stream. Do not crush the battery or place it in 
a fire. Check with your local solid-waste officials for details on 
recycling options or proper disposal.
CAUTION Internal components of the GD8000 computer will 
be damaged if exposed to contaminants. When dust covers, 
the PC card door, or the bottom access panel are open on the 
computer, shield the unit from all contaminants such as liquids, 
rain, snow, and dust.
This device may contain a WLAN radio transmitter, a WPAN 
radio transmitter, and a WAN radio transmitter.
Each internal radio may or may not have an individual FCC 
Identifier label. That FCC Identifier label is not applicable to this 
configuration. Only the external FCC ID label is applicable.










