User's Manual

As the backup battery is constantly being charged, its charge status is not displayed.

See Also

Battery Information

Checking the Batteries

Battery Charging

Battery Replacement

Battery Safety

Battery Storage

Battery Charging

Use only the AC Adapter or vehicle charger supplied with your handheld computer.

Plug the handheld computer charging adapter connector into the COM1 (left) socket of the handheld

computer. Then connect the AC Adapter to a suitable AC mains power supply.

NOTE

The AC adapter connector has spring loaded clips that keep the adapter attached when the unit

is in use. Press in both clip latches before attaching or removing the AC adapter to prevent damage to

the spring loaded clips.

The battery pack may take up to three hours to fully recharge. Make sure that the pack is fully recharged

to 100% capacity so that the battery gauge calculations will be accurate.

The left green LED below the display flashes regularly while the battery is charging. When charging is

complete, the green LED stays lit. If the LED ever flashes irregularly, a charging error has occurred and

you should seek advice from your system provider.