User's Manual
Table Of Contents
- ChapterTitle - 1: Introducing the AirCard800 Series Wireless Network Cards
- ChapterTitle - 2: The SIM Card and Your Account
- ChapterTitle - 3: Software and Driver Installation
- ChapterTitle - 4: Configuring Your Account
- ChapterTitle - 5: Care and Maintenance of Your Network Card
- ChapterTitle - 6: Watcher™ Basics
- ChapterTitle - 7: Technical Specifications
- ChapterTitle - 8: Regulatory and Safety Information
AirCard 800 Series Installation Guide
14 2130623
Note: You may require your Windows CD. Ensure you have the CD
before proceeding.
1. If the AirCard CD is not already in your CD-ROM drive,
insert it. The CD should autostart and display a menu.
· If the CD does not autostart, select Start > Run and enter
d:\setup.exe where d is the drive letter of your CD-ROM
drive.
2. From the CD start-up menu, select your language, then
notebook installation, and then notebook software installation to
launch the installer.
Note: The installer runs twice—
once to install Watcher and once
to install the Network Adapter
Manager.
3. Use the Next and Back buttons to navigate through the
installer.
4. If the SIM is not already inserted in your AirCard, insert it.
(See page 9.) If the antenna is not yet attached, attach it.
(See page 11.) With the label facing up, insert the AirCard
into your PC Card slot.
Note: Do not forcefully insert the
AirCard. This may damage
connector pins. If you have more
than one PC Card slot, you may
obtain better signal strength
using the top slot.
Figure 3-1: Inserting the AirCard
Watcher should launch automatically when the AirCard is
inserted. If your AirCard has not yet been configured to use
your account, you are prompted to do so. See “Setting up a
profile” on page 18.
To close the CD start-up menu, click the exit option in the
lower right corner of the window.