User's Manual

Always hold the disc by the edges; avoid touching the surface of the disc.
Use a clean, dry, cloth to remove dust, smudges, or fingerprints. wipe from the center outward.
Do not write on the surface of the disc.
Extremes in temperature may damage discs. Store discs in a cool dry place.
Do not use benzene, thinners, or cleaners with detergent. Only use CD0-ROM/DVD-ROM cleaning kits.
Do not bend or drop the discs.
Do not place objects on top of discs.
CAUTION
do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually. When
not in use, keep the tray closed to prevent dust or dirt from entering the drive unit. If you experience difficulty when
removing a CD/DVD disc, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject
hole located on the front panel.
The CD/DVD disk tray should eject immediately. This procedure can also be used to remove a CD-DVD from the
drive when the GoBook II is powered off.
72_0103_003
10 December 2002
© 2002 Itronix Corporation. All rights reserved.
The PC Card Slot
The PC card slot can be used as an interface between your computer and a variety of communications devices, such as
network adapters, SCSI adapters, and fax/modems. They can also be used to provide additional data storage capacity.
Your computer
s PC Card slot supports Type I, II or III
PC Cards, 32
-
bit CardBus cards, and Zoomed Video cards.
GoBook II™ Help
Page
21
74
GoBook II Help
7/31/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hh9A72.htm