User's Manual

Installing a Card

1. The top side of a PC Card is usually identified with a label. Insert the card into the slot with the top up and the

edge with pinhole contacts going in first. You will feel some resistance as the card slides into the back of the slot.

2. PC Cards require drivers, or a program that allows the operating system to use a specific device. Many drivers

are included with Windows, but if not, you will be prompted to install the driver included with your card.

NOTE

Please read the instructions included with individual PC Cards. Some cards may be inserted with power on,

while others require that the computer be turned off.

Removing a PC Card

1. If a PC Card is in use, you must shut down the PC Card before removing it.

2. Select the PC Card icon on the right side of the Windows tray taskbar , then tap Stop.

3. When the Windows message appears, telling you that it is safe to remove the card, tap OK.

4. Press the eject button on the PC Card slot to release the eject button (it is spring loaded and remains hidden until

it is pressed).

5. Press the eject button again to release the PC Card.

72_0103_003

10 December 2002

Making Connections

Page

GoBook II Help

7/31/2003

file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hh9A72.htm