User's Manual

Standard CMOS Setup
The Standard CMOS Setup page of the Setup Utility has a list of fields that describe the basic
configuration of your computer. CMOS is simply a type of Non-Volatile Memory used to store the
basic configuration of the computer.
Standard Feature Description
GoBook II™ Help
Field Settin
g
Function
System
Time
Use these fields to set the time and date. The time is displayed in
24 hour format. The date can be set from January 1, 1980 to
December 31, 2099. The values set in these two fields take effect
immediately.
Floppy
Drive A
Not
Installed
1.44 MB
(3 1/2")
Indicates if a floppy disk drive is installed. Default is 1.44 MB (3
1/2"). If this field is set to "Not Installed" the system will not
detect a floppy inserted in the media bay.
Type Shows type of system installed including the following options:
- (Pri. Master) Auto, user, Not Installed
- (sec. Master) auto, ATAPI CD-ROM, Not Installed
Pri. Master Auto
User
Not
Installed
The default setting is Auto. Auto lets the system automatically
read setup information from the device.
Sec. Master Auto
ATAPI
CD-ROM
Not
Installed
The default setting is Auto. Auto lets the system automatically
read setup information from the device. When set to Auto, the
BIOS will automatically detect hard disk capacity.
System
Memory;
These fields display the amount of conventional memory and
extended memory detected by the system during boot up. They
Pa
g
e 36 of 71GoBook II Hel
p
2/17/2004file://C:\Documents%20and%20Settin
g
s\harwoodm.ITRXNT1\Local%20Settin
g
s\Tem
p
\~...