User's Manual

1. Locate the 15-pin VGA monitor port on the back of the unit behind the IO door. Then connect the

video signal cable from the external monitor to the monitor port.

2. Connect the monitor’s power cable to a power outlet and turn on the monitor.

3. If the new monitor has not automatically been detected and is not displaying what appears on your

GoBook III’s LCD screen, open the Control Panel.

4. Double-tap

Display

. The Display Properties window opens.

5. Tap the

Settings

tab. Then select the

Advanced

button.

6. Tap the

S3DuoVue

tab and select the CRT box the enable display on an external monitor.

7. You can also use the

hot keys to cycle through the CRT, LCD, and CRT/LCD settings.

72_0119_001

28 June 2004

Disk Drives

Your computer comes with several components for reading and writing (recording) information.

The Hard Disk Drive

The hard disk provides high-capacity storage and fast access. Windows and most programs are stored

here. Your GoBook III identifies the hard disk drive as drive C. For information about removing or

installing the hard drive see Hard Drive Care and Handling.

The Floppy Disk, CD-ROM, or DVD-ROM Drive

Your computer may come with a floppy disk drive. The floppy disk drive accepts 3.5-inch floppy disks

and is read and write capable.

The CD-ROM drive is a read only drive. It cannot be used to write data to a recordable compact disk.

The CD-ROM drive can read data from CDs, including audio or video CDs. The DVD drive can read

both DVD and CD disks. Your GoBook III identifies the drive with the letter following the hard drive

letter. If

ou hard drive is C, then the CD-ROM drive will be D. The media ba

is located on the ri

GoBook III

Help

e 20 of 80GoBook III Hel

7/5/2004file://C:\Documents%20and%20Settin

s\harwoodm.ITRXNT1\Local%20Settin

s\Tem

\~h...