User's Manual

Physical Inspection

Periodically inspect the computer and accessories for wear, damage, loose or

missing parts. Identifying and correcting potential problems early can help reduce the need to return the

unit for service.

Outside Case

Like all tools, the outside of the computer will get dirty with use. The case is made of

ainted Magnesium and polycarbonate blend (plastic) doors and covers. These areas can be cleaned with

a solution of one part Formula 409™ and one part water. Follow the procedure below.

To clean the outside case

1. Disconnect external power and turn off the computer.

2. Remove the battery.

3. Using a soft, dry cloth (do not use paper products because they can scratch the surface, add a

small amount of cleaning solution to the cloth and clean the computer case.

4. Wipe off any excess liquid with a soft cloth.

5. Reinstall the battery.

Display

Periodically inspect the display to make sure the brightness function is operating properly and

that all pixels are operational.

To clean your touch screen

To clean the display assembly, use the same cleaning solution and procedure described earlier for the

outside case. In some cases, you can use a small amount of isopropyl alcohol to remove streaks or

smears. Use a soft, clean cloth to clean the display. Do not use paper products because they can scratch

the screen.

External Power Connector

The external power connector may sometimes be exposed to moisture

and/or contamination causing an unreliable connection to the external power source.

Clean the connector using a cotton swab dipped in isopropyl alcohol.

RJ-11/ RJ-45 / USB / IEEE 1394 Connectors

Make sure these connectors are operating properly.

During normal use, the connector pins can get dirty or become broken, bent, or pushed out of place.

Clean the connector with a cotton swab dipped in isopropyl alcohol.

Keyboard

Check all keys to make sure they are working properly. To clean the keyboard, use the same

cleaning solution and procedure described above for the outside case.

If keyboard problems persist, the keyboard might need to be replaced. This can be done without

returning the unit for service. Contact your local support person for more information.

I/O Ports

Make sure the video, serial, and audio ports are operating properly. Periodically inspect the

orts for damage or contamination, and make sure the cover is attached to the computer. The I/O cover

can be replaced without returning the unit for service. Contact your local support person for more

information.

e 60 of 80GoBook III Hel

7/5/2004file://C:\Documents%20and%20Settin

s\harwoodm.ITRXNT1\Local%20Settin

s\Tem

\~h...