User's Manual

Outside Case

1. Disconnect external power and turn off the computer.

2. Remove the battery.

3. Add a small amount of water to a soft cloth and clean the computer case. Do not use paper

products because they can scratch the surface.

4. Wipe off any excess liquid with a soft cloth.

5. Reinstall the battery

CAUTION Aerosols, solvents, or strong detergents are not recommended cleaning solutions

and may void your warranty. For system decontamination recommendations please contact you

support representative.

Display

Use a soft, dry cloth. In some cases, you can use a small amount of water to remove streaks or smears.

For difficult display cleaning tasks, use a 50/50 mixture of Isopropyl Alcohol and Water. Do not use

aper products because they can scratch the screen.

External Power Connector

The external power connector may sometimes be exposed to moisture and/or contamination causing an

unreliable connection to the external power source. Clean the connector with a cotton swab dipped in

electronics grade isopropyl alcohol.

RJ-11/ RJ-45 / USB Connectors

If the connector pins get dirty, clean the connector with a cotton swab dipped in electronics grade

isopropyl alcohol.

Backup and Recovery

Data Backup

There are several methods to backup your data. It is best to regularly use all the methods below to ensure

the greatest data integrity, provide the fastest recovery options, and minimize downtime.

After you have installed all your applications and have your computer configured as desired, create a

backup of drive C: using the Hard Disk Backup and Recovery Utility. Then, use the Windows Backup

Utilit

on a fre

uent basis to backu

our dail

data. It is recommended that

ou schedule the Windows

72_0130_001

2006-07-10

oration. All ri

hts reserved.

GoBook

XR-1 Help

e 84 of 92GoBook X

-1 Hel

8/3/2006file://C:\Documents and Settin

s\harwoodm\Local Settin

s\Tem

\~hh2D1C.htm