User's Manual

FAQs
 How do I calibrate the pen?
Calibrate your display based on whether you are using Digitizer Mode or Touch Screen Mode.
Switching Between Digitizer and Touch Screen Modes
Using Hot Keys: Press the Line Up and Line Down hot keys simultaneously to switch the display
between digitizer and touch screen modes while in Windows. You will hear one beep for touch
screen mode and two beeps for digitizer mode.
Using Windows:
1. Select the Buttons / Device / Brightness Properties icon in the taskbar.
2. Select the Device On / Off tab.
3. Select the Digitizer / Touch Screen button to change between digitizer and touch screen
modes.
Calibrating the Digitizer Touch Panel
1. From the Start Menu, select Control Panel.
2. If you are in Classic View continue to step 3. If you are in Category View select Printers
and Other Hardware and continue to step 3.
3. Select Tablet and Pen Settings and then select the Settings tab.