Product Specifications

DIMENSIONS AND INSTALLATION INFORMATION
JKD3000DN/SN
GE
®
27" Built-In Double Electric Wall Oven
For answers to your GE Profile
™
Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/19
Listed by
Underwriters
Laboratories
JKD3000
Dimension and installation information are shown in inches.
NOTE: Wall coverings, countertops and
cabinets surrounding the wall oven must
be able to withstand a temperature of up to
200°F (94°C).
NOTE: If the cabinet in which the wall oven
is installed does not have a solid bottom, two
braces or runners must be installed to support
the weight of the oven. The runners and
braces must support up to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
ATTENTION INSTALLER: Electric wall
ovens are NOT approved for installation with
a plug and receptacle. They must be hard
wired into an approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with product
for current dimensional data.
KW RATING
240V 8.4
208V 6.3
BREAKER SIZE
240V 40 Amps
208V 40 Amps
Cabinet 27"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 1"
C - Overlap of oven at bottom of cutout 1"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 51-1/8"
F - Overall width 26-3/4"
8-3/4" MAX.
F
Conduit
48"
44" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
25" MIN.
25-1/4" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 400 lbs.)
C
L
Cutout height
49-11/16" MIN.
50-1/8" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
27''
CKD70DM2NS5, CKD70DP2NS1, JKD3000DNBB,
JKD3000DNWW, JKD3000SNSS, JKD5000DNBB,
JKD5000DNWW, JKD5000ENES, JKD5000SNSS,
PKD7000BNTS, PKD7000FNDS, PKD7000SNSS
Cabinet 27"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 1"
C - Overlap of oven at bottom of cutout 1"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 51-1/8"
F - Overall width 26-3/4"
8-3/4" MAX.
F
Conduit
48"
44" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
25" MIN.
25-1/4" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 400 lbs.)
C
L
Cutout height
49-11/16" MIN.
50-1/8" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
27''
CKD70DM2NS5, CKD70DP2NS1, JKD3000DNBB,
JKD3000DNWW, JKD3000SNSS, JKD5000DNBB,
JKD5000DNWW, JKD5000ENES, JKD5000SNSS,
PKD7000BNTS, PKD7000FNDS, PKD7000SNSS
Cabinet 27"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 1"
C - Overlap of oven at bottom of cutout 1"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 51-1/8"
F - Overall width 26-3/4"
8-3/4" MAX.
F
Conduit
48"
44" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
25" MIN.
25-1/4" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 400 lbs.)
C
L
Cutout height
49-11/16" MIN.
50-1/8" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
27''
CKD70DM2NS5, CKD70DP2NS1, JKD3000DNBB,
JKD3000DNWW, JKD3000SNSS, JKD5000DNBB,
JKD5000DNWW, JKD5000ENES, JKD5000SNSS,
PKD7000BNTS, PKD7000FNDS, PKD7000SNSS
Cabinet 27"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 1"
C - Overlap of oven at bottom of cutout 1"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 51-1/8"
F - Overall width 26-3/4"
8-3/4" MAX.
F
Conduit
48"
44" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
25" MIN.
25-1/4" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 400 lbs.)
C
L
Cutout height
49-11/16" MIN.
50-1/8" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
27''
CKD70DM2NS5, CKD70DP2NS1, JKD3000DNBB,
JKD3000DNWW, JKD3000SNSS, JKD5000DNBB,
JKD5000DNWW, JKD5000ENES, JKD5000SNSS,
PKD7000BNTS, PKD7000FNDS, PKD7000SNSS