Literature

61
GEAppliances.com
30" Slide-In Range Dimensions (in inches)
Models JSP34/26 and JSS26/16
28-1/4*
36
Maintain
at least 6"
from nearest
combustible
surface.
Acceptable
Electrical
Outlet Area
45-1/8
2-1/4
5
6
4-1/2
30
30 Min.
15 Min.
6
*Wall to front of
closed door handle
on model JSP34.
28" on models
JSP26/JSS26/16.
30
30-3/4
23-3/16
30
If you are NOT using the
optional Filler or Backguard:
30
If you are using the
optional Filler or Backguard:
25
23-3/16
30
If you are NOT using the
optional Filler or Backguard:
30
If you are using the
optional Filler or Backguard:
25
Accessory Backguards—GE Profile
(Attaches to the back of range as a
backguard when unit is installed in
30" free-standing cutout)
JXS37WW—White
JXS37CC—Bisque
JXS37BB—Black/Stainless
Body Sides
(Slide-in ranges are sold without sides
installed. Can be installed on either left or
right when unit has one exposed side [no
cabinet adjacent]. Kit contains 1 body side)
JXS76WW—White
JXS76CC—Bisque
JXS76BB—Black/Stainless
Vertical Side Trim Kits
(If cabinet cutout width is more than 30",
a vertical side trim kit may be used to close
the gap between the range and cabinet)
JXS86WW—White
JXS86CC—Bisque
JXS86BB—Black/Stainless
Optional Lower Trim Kits
(If counter height is greater than 36-1/2",
a lower trim kit is recommended to
extend the useful height to 38" maximum)
JXS56WW—White
JXS56CC—Bisque
JXS56BB—Black/Stainless
Optional Top Filler Kits
JXS66BB—Black/Stainless
JXS66CC—Bisque
JXS66WW—White
Optional Kits for Slide-In Electric Ranges
(Models JSP34/26 and JSS26/16)
(Available at additional cost)
Models shown are shipped with rear filler strip kit.
Accessory Backguards
JXS31—White
JXS34—Black
JXS35—Bisque
Endcap Kit
JXS40—Endcap kit to accommodate replacement
where countertop may already be notched.
Lower/Side Trim Kits
(If countertop height is greater than 36-1/2", it is
recommended to use a lower trim kit.)
JXS56BB—Lower trim (Black)
JXS56WW—Lower trim (White)
JXS56CC—Lower trim (Bisque)
Optional Kits for Slide-In Electric Ranges (Models JS968 and JSP47)
(Available at additional cost)
Note: Maintain at least 6" distance from nearest combustible surface.
2-7/8"
To Front
Surface Of
Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
31-1/4
30
27-1/2
4
Accessory
Backguard
24
30" Slide-In Range Dimensions (in inches)
Models JS968 and JSP47
Acceptable
Electrical
Outlet Area
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
36
Recommended
6" Min.
From Walls
23-3/16
15" Min.
13" Max.
2-1/2
30
25
9/16
7-1/2
2-1/2