Use and Care Guide

36 49-3000206 Rev 5
Installation Instructions
STACKING THE WASHER AND DRYER
(Optional Kit GFA28KITN)
INSTALL THE APPROPRIATE
BRACKETS TO THE WASHER
Select the appropriate brackets for your model sizes.
Using the outside holes in the bracket, attach it to the
top left corner of the washer back using 4 screws.
Repeat on the top right corner of the washer back.
3
Washer Depth Dryer Depth Bracket Number
32" (81.3 cm) 32" (81.3 cm) 32
34" (86.4 cm) 32" (81.3 cm) 34
OR
Install brackets flush at
washers edges
Do not install brackets
overhanging washers edges
Install brackets flush at
washers edges
Do not install brackets
overhanging washers edges
PREPARE THE WASHER AND
DRYER
A. Place the washer in the approximate final
installation location.
B. Make sure the washer is level. Refer to the washer
Installation Instructions for details.
C. Upright the dryer.
D. Reverse the washer and dryer door swings, if
desired, before stacking the dryer on the washer.
See the washer and dryer Installation Instructions
for details.
4
N
o
32 Brackets for 32" (81.3 cm) Washer & Dryer
Combinations:
Attach
brackets to
washer using
4 screws on
each side
N
o
34 Brackets for 34" (86.4 cm) Washer & 32" (81.3 cm)
Dryer Combinations:
Attach
brackets to
washer using
4 screws on
each side