SDS

ManualsBrandsGeneral Finishes ManualsInterior Stain1-pt. Antique Walnut Oil-Based Interior Wood Gel Stain

GF Gel Stain Antique Walnut

Section 5. Fire-fighting measures

Move containers from fire area if this can be done without risk. Use water spray to keep

fire-exposed containers cool.

Hazardous thermal

decomposition products

Decomposition products may include the following materials:

carbon dioxide

carbon monoxide

Sulfur oxides

metal oxide/oxides

Fire-fighters should wear appropriate protective equipment and self-contained breathing

apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective

equipment for fire-fighters

Special protective actions

for fire-fighters

Section 6. Accidental release measures

Environmental precautions

Personal precautions, protective equipment and emergency procedures

No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from

entering. Do not touch or walk through spilled material. Shut off all ignition sources.

No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide

adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put

on appropriate personal protective equipment.

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains

and sewers. Inform the relevant authorities if the product has caused environmental

pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to

the environment if released in large quantities.

Methods and materials for containment and cleaning up

For non-emergency

personnel

For emergency responders

If specialized clothing is required to deal with the spillage, take note of any information in

Section 8 on suitable and unsuitable materials. See also the information in "For non-

emergency personnel".

Small spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and

explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,

water courses, basements or confined areas. Wash spillages into an effluent treatment

plant or proceed as follows. Contain and collect spillage with non-combustible,

absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in

container for disposal according to local regulations (see Section 13). Dispose of via a

licensed waste disposal contractor. Contaminated absorbent material may pose the

same hazard as the spilled product. Note: see Section 1 for emergency contact

information and Section 13 for waste disposal.

Large spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and

explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively,

or if water-insoluble, absorb with an inert dry material and place in an appropriate waste

disposal container. Dispose of via a licensed waste disposal contractor.

Section 7. Handling and storage

Protective measures

Put on appropriate personal protective equipment (see Section 8). Persons with a

history of skin sensitization problems should not be employed in any process in which

this product is used. Avoid exposure - obtain special instructions before use. Do not

handle until all safety precautions have been read and understood. Do not get in eyes

or on skin or clothing. Do not ingest. Avoid breathing vapor or mist. Avoid release to

the environment. Use only with adequate ventilation. Wear appropriate respirator when

ventilation is inadequate. Do not enter storage areas and confined spaces unless

Precautions for safe handling

4/12

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)