Specification Sheet

Product Data:
• Density: 8.8 +/- 0.2 lbs.
• Weight Solids: 20.5 - 24.5%
• Volume Solids: 18.5 - 22.5%
• Viscosity: 50 - 60 seconds
• Method: Ford #4 @ 77 F.
• pH: 7.0 - 8.0
• V.O.C.: 275 g/l ( 2.28 lbs/gal)
excluding water
• Actual V.O.C. 75 g/l (.063 lbs./gal)
• % VOC: 7.30%
• Storage: Protect from Freezing
Container:
Pints, Quarts, gallons, Fives and Drums
Sheen:
Flat (10), Satin (30), Semi-gloss (50) and
Gloss (90)
Dry Time: 70
O
F and 50% R.H:
Dry: 10 - 30 minutes tack
free.
Recoat time: 2-4 hours
Classification:
Water Based Self-Crosslinking Urethane Finish
Product Description:
ENDURO-VAR water based urethane finish is a highly ad-
vanced self crosslinking coating. This is a highly ad-
vanced aromatic alkyd urethane similar to traditional oil
based varnish. It has a warm amber tone and cures by
oxidation. However Enduro-Var is water base, VOC-
Compliant, low odor, non-flammable, and will clean-up
with soap and water. It is self-sealing
, and typically does
not require thinning. Designed for furniture, cabinets and
floors applications, Enduro-Var Urethane dries very
quickly for sanding and re-coating. Not Suitable over white
finishes due to amber hue.
Application:
Brush or roll, spray.
HVLP: Use a 0.043” - 0.051” (1.1—1.3 mm) nozzle / tip as-
sembly & #9 Air Cap. Airless: 0.009”—0.011” tip. Allow 30
minutes -2 hours dry before sanding (temperature / humid-
ity dependent). Sand with #220 or finer between coats. 2 -
4 coats recommended.
General Finishes, 2462 Corporate Circle, East Troy, WI 53120
800.783.6050 (F) 262.642.4707
www.generalfinishes.com
The industry leader in water based technology.
ENDURO-VAR
URETHANE
ENDURO