TDS

ManualsBrandsGeneral Finishes ManualsInterior Stain & Waterproofing1 gal. Gloss High Performance Polyurethane Interior Topcoat

Classification:

Water Based Urethane / Acrylic Finish

Product Description:

High Performance Poly is a unique Hybrid of urethane and

acrylic technology. The specialized urethane modification

provides superior toughness, durability, and water re-

sistance necessary for high wear surfaces such as tables

and cabinets. It is stabilized with UV absorbers to maximize

its performance and afford protection to the stains, paints,

and wood underneath. High Performance is a fast drying,

low odor, non-flammable alternative to conventional lac-

quers. It is suitable for interior woodwork, case goods, fur-

niture, and cabinets.

Application:

High Performance Poly can be applied by brush or spray.

Stir contents well before application. Brush: Use a quality

foam brush or paint pad applicator. Spray: Compressed air:

0.40” fluid tip / medium cap; HVLP: 0.051” fluid tip / medium

cap ; Airless: 0.009”- 0.011” tip. Allow 1 –2 hours between

coats before sanding (temperature / humidity dependent).

Sand between coats with # 320 grit paper or finer. 3 - 5

coats recommended.

General Finishes, 2462 Corporate Circle, East Troy, WI 53120

800.783.6050 (F) 262.642.4707

www.generalfinishes.com

The industry leader in water based technology.

HIGH

PERFORMANCE

POLYURETHANE

ENDURO

Product Data:

 Density: 8.5 +/- 0.2 lbs.

 Weight Solids: 21.5 - 24.5%

 Volume Solids: 19.0 - 22.0%

 Viscosity: 35 - 45 seconds

 Method: Ford #4 @ 77 F.

 pH: 7.0 - 8.0

 V.O.C.: <275 g/l ( 2.25 lbs/gal)

excluding water

 % VOC: 8.8 –9.8%

 Storage: Protect from Freezing

 Coverage: Approx. 600 sq.ft./gal

Container:

Ones, Fives and Drums

Sheen:

Satin, Semi-gloss and Gloss

Dry Time 70

F and 70% R.H:

 Dry: 1 - 2 hours

 To Sand: 1 -2 hours

Summary of content (2 pages)

PAGE 1
ENDURO HIGH PERFORMANCE POLYURETHANE The industry leader in water based technology. Product Data: Classification: Water Based Urethane / Acrylic Finish  Density: 8.5 +/- 0.2 lbs. Product Description:  Weight Solids: 21.5 - 24.5% High Performance Poly is a unique Hybrid of urethane and  Volume Solids: 19.0 - 22.0%  Viscosity: 35 - 45 seconds sistance necessary for high wear surfaces such as tables  Method: Ford #4 @ 77 F. and cabinets.
PAGE 2
The industry leader in water based technology. Mixing and Application: Application:  Catalyst Ratio: None  Conventional Spray:  Pot Life: Not Applicable  Air Assisted Airless  Shelf Life: 1 year, minimum  HVLP  Reducer/Thinner: EF Extender (10 –20%)  Brush Stain & Sealer Recommendation: Can be used over most water base and solvent base stains. For best results and superior color and adhesion, General Finishes EF Water Base Stains and GF Oil Base Stains are recommended.