Specification Sheet

Product Data:
• Density: 9.8 –10.9 lbs.
• Weight Solids: 41.0 - 51.0%
• Volume Solids: 31.0 - 41.0%
• Viscosity: 3,000 –5,000 cps.
• Method: Brookfield @ 77 F.
• pH: 7.0 - 8.0
• V.O.C.: <150 g/l ( 1.25 lbs/gal)
excluding water
• % VOC: 4.4 –4.8%
• Storage: Protect from Freezing
• Coverage: Approx. 400 –500
sq.ft./gal
Container:
Pints, Quarts, Gallons, Fives and Drums
Sheen:
Satin
Dry Time 70
O
F and 70% R.H:
• Dry: 0.5 –2 hours
• To Sand: 1 -2 hours
jtàxÜ Utáx
GENERAL FINISHES
2462 Corporate Circle East Troy, WI 53120
800-783-6050 Fax [phone]
Milk Paint
GENERAL FINISHES
“The Country’s Finest Full Line Manufacturer of Wood Finishing Products”
www.generalfinishes.com
Classification:
Water Based Furniture-Grade Acrylic Paint
Product Description:
General Finishes Milk Paint is a high quality, furniture-
grade paint designed to provide a tough, durable, chip-
resistant finish. It may be applied via brush or spray and
possesses excellent flow and leveling properties. The
unique formulation dries rapidly, resists blocking, and will
sand effortlessly. This proprietary technology resists
cracking at joints and knots that are often associated with
typical paints. General Finishes Milk Paint is UV resistant,
suitable for interior and exterior applications, and dries to
a satin finish. Available in stock or custom colors. May
be used in interior or exterior applications.
Application:
General Finishes Milk Paint may be applied via brush or
spray applications. Stir well before application. Brush:
use a foam or high quality synthetic brush. Spray: Ac-
cuspray HVLP: 0.072” fluid tip / #10 Air Cap; Airless: 0.015
- 0.021” tip. Allow 1 –2 hours between coats before sand-
ing (temperature / humidity dependent). Sand between
coats with # 220 or finer grit paper. Multiple coats may be
needed dependant upon the substrate.