Specification Sheet

Mixing and Application:
• Catalyst Ratio: None
• Pot Life: Not Applicable
• Shelf Life: 1 year, minimum
• Reducer/Thinner: EF Extender (10 –20%)
Stain & Finish Recommendation:
Can be used over most water base and solvent base
stains. For best results and superior color and adhesion,
General Finishes EF Water Base Stains and GF Oil Base
Stains are recommended. Milk Paint is available in a
primer grade (recommended). Allow stains to dry thor-
oughly before applying Sanding Sealer.
Topcoat with General Finishes Pro-Series, PolyAcrylic,
High Performance, or Pre-Cat 181. Most solvent-based
pre-cat lacquers and conversion varnishes may also be
used. Allow paints and finishes to dry before thoroughly
before topcoating.
Surface Preparation:
Surface must be clean, dry, and free of all contaminants.
Sand with 220 grit or finer between coats. Consult product
label for additional information.
Application:
• Conventional Spray
• Air Assisted Airless
• HVLP
• Brush
Cautions:
• Mix container before use
• Protect from freezing
• Read MSDS for safety information
• Clean-up Information:
For best results, clean all equipment
with General Finishes Brush and Gun
Cleaner. General clean-up with soap
and water recommended. Rinse
thoroughly with clean water.
GENERAL FINISHES
2462 Corporate Circle, East Troy, WI 53120 800-783-6050
NOTICE: All of the above statements, recommendations, suggestions, and data concerning the subject material are based on laboratory results and
believed to be reliable. We expressly do not represent, warrant, or guarantee the accuracy, completeness or reliability of same, or the material or
the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials shall be
free of the rightful claim of any third party by way of INFRINGEMENT or the like and (THE MANUFACTURER DISCLAIMS ALL
WARRANTIES, EXPRESSED OR IMPLIED,) OF MERCHANTABILITY and FITNESS FOR A PARTICLUAR PURPOSE.
Milk Paint
062007