Use and Care Manual

GF Gel Stain Satin Topcoat
Section 9. Physical and chemical properties
VOC content
565.023 g/L
:
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Section 11. Toxicological information
Acute toxicity
2-Butanone oxime
LD50 Oral
Rat
930 mg/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Carcinogenicity
Irritation/Corrosion
Stoddard solvent
Eyes - Moderate irritant
Rabbit
-
24 hours 500 mg
-
Eyes - Mild irritant
Human
-
100 ppm
-
2-Butanone oxime
Eyes - Severe irritant
Rabbit
-
100 µL
-
Product/ingredient name
Result
Score
Exposure
Observation
Sensitization
Species
Information on the likely
routes of exposure
No known significant effects or critical hazards.
:
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Aspiration hazard
Name
Result
Distillates (petroleum), hydrotreated light
ASPIRATION HAZARD - Category 1
Stoddard solvent
ASPIRATION HAZARD - Category 1
Information on toxicological effects
:
Dermal contact. Eye contact. Inhalation. Ingestion.
Potential acute health effects
There is no data available.
There is no data available.
There is no data available.
There is no data available.
7/12
Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com