Conforms to HCS 2012 - United States SAFETY DATA SHEET High Performance Satin Section 1. Identification GHS product identifier Other means of identification Product type : High Performance Satin : Not available. : Liquid. Relevant identified uses of the substance or mixture and uses advised against Identified uses : Not available. Manufacturer : General Finishes 2462 Corporate Circle East Troy, WI 53120 U.S.A. Phone no.: 262-642-4545 Toll free no.: 1-800-783-6050 Fax no.
High Performance Satin Section 3. Composition/information on ingredients Substance/mixture Other means of identification : Mixture : Not available. CAS number/other identifiers CAS number : Not applicable. Product code : Not available. Ingredient name % CAS number 2,4,7,9-Tetramethyldec-5-yne-4,7-diol 0.1 - 1 126-86-3 Any concentration shown as a range is to protect confidentiality or is due to batch variation.
High Performance Satin Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : In case of fire, use water spray (fog), foam, dry chemical or CO2. : None known. Specific hazards arising from the chemical Hazardous thermal decomposition products : No specific fire or explosion hazard. Special protective actions for fire-fighters Special protective equipment for fire-fighters : No special measures are required.
High Performance Satin Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
High Performance Satin Section 8. Exposure controls/personal protection Respiratory protection : Use a properly fitted, air-purifying or supplied air respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Section 9.
High Performance Satin Section 11. Toxicological information Information on toxicological effects Acute toxicity There is no data available. Irritation/Corrosion Product/ingredient name Result 2,4,7,9-Tetramethyldec-5-yne-4,7-diol Eyes - Severe irritant Skin - Mild irritant Species Score Exposure Observation Rabbit Rabbit - 0.1 mL 0.5 g - Sensitization There is no data available. Mutagenicity There is no data available. Carcinogenicity There is no data available.
High Performance Satin Section 11. Toxicological information Potential immediate : No known significant effects or critical hazards. effects Potential delayed effects : No known significant effects or critical hazards. Potential chronic health effects General : No known significant effects or critical hazards. Carcinogenicity : No known significant effects or critical hazards. Mutagenicity : No known significant effects or critical hazards. Teratogenicity : No known significant effects or critical hazards.
High Performance Satin Section 14. Transport information DOT Classification UN number IATA Not regulated. Not regulated. - - Transport hazard class(es) - - Packing group - - - Environmental hazards No. No. No. Additional information - - - UN proper shipping name Not regulated. IMDG - AERG : Not applicable. Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure.
High Performance Satin Section 15. Regulatory information SARA 311/312 Classification : Not applicable. Composition/information on ingredients Name % Fire Sudden hazard release of pressure Reactive Immediate (acute) health hazard Delayed (chronic) health hazard 2,4,7,9-Tetramethyldec-5-yne-4,7-diol 0.1 - 1 No. No. Yes. No. No. SARA 313 There is no data available.
