WaterFarm ™ 8-Pack Assembly Guide
WATERFARM 8-PACK PARTS 1 2 ASSEMBLY 3 4 STEP 1 Disassemble the Float Valve and insert the threaded end with the washer from the inside of the Controller, through the predrilled hole.
ASSEMBLY STEP 2 Insert the DLT Clip into the predrilled hole in the handle of the Controller and insert the Drain Level Tube into the ½” grommet at the bottom. Secure the Drain Level Tube upright in the DLT Clip during normal operation. The Drain Level tube can be rotated level with the bottom of the controller to drain the system. ASSEMBLY STEP 4 Place the lid on the Controller and remove the tear away strip for easier opening and closing of the lid.
ASSEMBLY STEP 6 Place the Growing Chamber on each of the Individual Reservoirs and insert the Pumping Column Support Tube in the large hole in the bottom of the Growing Chamber. ASSEMBLY STEP 9 Connect the manifold to the Dual Diaphragm Air Pump and connect each of the individual growing units using the airline tees (that are packaged with the Dual Diaphragm Air Pump) to the Pumping Column airline.
HELPFUL GUIDELINES HELPFUL GUIDELINES & TROUBLE SHOOTING FILLING OPERATION When filling the system with a nutrient solution it is best to mix the nutrients in a known volume of fresh water and pour into the controller until the system reaches the desired level. The controller and 8 individual growing units hold approximately 17 gallons. The float valve can be adjusted by bending the float valve arm so that the float valve is all the way up in the off position.
FLORANOVA® FloraNova represents a break-through in fertilizer technology. FloraNova gives users both the strength of a dry concentrate and the ease of a liquid. This unique formulation of highly purified minerals and natural additives combines the benefits of both organic and soil less gardening methods. Optimum nutrient absorption is aided by natural humic extracts for increased quality and superb yields. FloraNova is a one part formula that is pH stabilized outstanding for all plant types.