Specification

SETUP & OPERATION MANUAL
Version
#
1_Revision
#
2 - February 2016
© Copyright General International
12" VARIABLE SPEED DRILL PRESS
- BENCH TOP
MODEL
#
75-010
FEATURES
Forced opening line interrupter switch, requires
machine restart in case of power failure or circuit
interruption.
Adjustable spindle tension return spring.
Built-in laser pointer.
Sturdy design with cast-iron head, base, and
table.
High-quality bearings for smooth, vibration-free
operation.
Simple hand lever controlled mechanical
variable speed from 500 to 3000 rpm.
Digital spindle speed display.
1/3 HP industrial-quality, 120 V motor.
Equipped with easy to adjust dual depth stop for
complete control of both down stroke depth and
upstroke travel.
5/8Ǝ chuck with key & convenient onboard
chuck key holder.
Easy to use see-through flip-up chuck guard
included.
Crank-operated rack and pinion table height
adjustment.
SPECIFICATIONS
• Swing
12" (305 mm)
• Drilling capacity
5/8" (16 mm)
• Chuck size
5/8" (16 mm)
• Spindle travel
3 1/8" (80 mm)
• Spindle distance to table
15" (380 mm)
• Spindle distance to base
21 7/8" (556 mm)
• Table size
9 1/2" x 9 1/2" (240 x 240 mm)
• Column diameter
2 1/2" (65 mm)
• Spindle speeds
(Variable) - 500 to 3000 rpm
• Spindle taper
MT 2
• Overall height
34 1/8" (868 mm)
• Base size
15" x 9 5/8" (380 x 245 mm)
• Motor
1/3 HP, 120 V, 3.2 A
• Weight
75 lbs (34 kg)