Manual

Page 15 of 64 General Machine Products Co., Inc.
5. Fit the cable seal plug and two cable seals (coated
with silicon grease) into the lower half cable seal col-
let. Ensure that the split of the innermost seal is in the
lower half of the air chamber slightly rotated from the
vertical. The split of the outer most seal is also in the
lower half of the air chamber slightly rotated from the
vertical in the other direction to the innermost seal.
Both grooves face away from the tractor drive.
6. Fit the upper cable guide collet ensure both seals
are correctly located.
7. Re-fit the air chamber lid ensuring correct location
on the dowels and tighten down the 4 retaining knobs.
8. Check the air valve is in the “closed” position and connect the air supply from the com-
pressor