Manual

Page 26 of 64 General Machine Products Co., Inc.
31. Turn hydraulic valve to “ON” position. 32. Ensure the emergency stop button is in the
reset position. (Twist counterclockwise to reset).
33. Press the on/off button.
Note: Do not press the RST Button while
powering up the counter.
The display will indicate the speed and distance
travelled by the cable. To toggle between speed
and distance press the SEL (green) button. R
displayed on the left side of the screen desig-
nates speed (rate). To reset the distance press
RST (red) button.
Note: It is possible to reset the distance to
zero while installing, even if speed is being
displayed on the screen.
34. Turn the speed control valve clockwise
(towards “MAX”) until the required speed is
achieved.