Manual

Page 3 of 64 General Machine Products Co., Inc.
CONTENTS
1. Safety Instructions
2. Critical Points
3. General Description
4. Specification
5. Operating Procedure - Sub-Duct Integrity and Lubrication
6. Operating Procedure—Cable Blowing
7. Maintenance
8. Procedure for Replacement of Chain Drives
9. Procedure for Replacement of Cable Collets
10. Procedure for Replacement of Sub-Duct Clamp Collets
11. Procedure for Replacement of Cable Seals
12. Procedure for Adjusting the Air Chamber and collet type cable infeed guide assembly height
13. Alignment of air chamber to the cable pusher unit
14. Monthly Service Check List
15. Service History Record
16. Troubleshooting Guide
17. Recommended Spare Parts
APPENDICES
Appendix 1 Layout of Cable Blowing Machine
Appendix 2 Reserved
Appendix 3 Cable Blowing Machine Service Connections
Appendix 4 Hydraulic & Electrical Panel Layout
Appendix 5 Appendix 6 Tornado Configuration Guide
Appendix 6 Counter/Rate meter Programming Instructions
GMP Limited Warranty