Manual

Page 46 of 64 General Machine Products Co., Inc.
14. MONTHLY SERVICE – CHECK LIST
1. Remove the drive chains from the pusher unit. Check both of the chains for excessive
wear. Replace, if required and lubricate with the spray grease provided.
2. Remove any debris from the housings.
3. Check the chain supports slide bars for excessive wear and lubricate with the spray
grease provided. Replace, if required.
4. Check all other moving parts e.g. bearings, shafts, sprockets etc. . and lubricate.
5. Check main jacking screw . and lubricate.
6. Check all hydraulic fittings and check for leaks.
7. Check the hydraulic hoses for external damage.
8. Check the electrical lead for external damage.
9. Check the electrical plug and sockets.
10. Check the function of the electronic control module.
11. Check the operation of the emergency stop button.
12. Check condition of cable seals and cord seals in the air chamber.
13. Check the operation of the cable measuring device.
14. Check the wheel tire pressures and free rotation. Inflate and lubricate, as necessary.
15. Clean the infeed cable guide bracket.
16. Complete service history record.