Manual

Page 60 of 64 General Machine Products Co., Inc.
1a. General Machine Products Co., Inc. ("GMP") warrants to the purchaser and/or end user:
(1) that a new product sold and manufactured by GMP will be free from original defects in material and work-
manship for one year from the date the product was delivered to the purchaser and/or end user, or for the life-
time of the Modular Plug Presser;
(2) that a new product sold and not manufactured by GMP will be covered exclusively by the manufacturer's war-
ranty. However, if that warranty coverage shall provide less coverage than the GMP Warranty for its manufac-
tured products, then the warranty set forth in Paragraph 1(a)(1) above shall apply instead;
(3) that a reconditioned used GMP product sold by GMP, or a non-owned product repaired by GMP, or a new
part sold by GMP, will be free from original defects in material and workmanship for ninety days from the date
the product was delivered to the purchaser and/or end user.
1b. The above warranties are contingent upon and subject to the condition that: (1) the end user substantiates
the date it purchased and received delivery of the product or part, and (2) the product or part shall have been
installed, maintained and used in accordance with GMP's or the manufacturer's written instructions.
2. The end user shall determine the suitability of GMP's product or part for intended use, and the end user as-
sumes all risk and liability whatsoever in connection therewith except to the extent set forth in this Limited War-
ranty.
3a. GMP reserves the right to request that the product or part be returned to us for examination and cannot be
responsible for user charges incurred in the replacement of any product. GMP's agreement to repair or replace
is also subject to its inspection of the product and verification of the defect.
3b. Subject to immediate written notification of a defect or malfunction, GMP will repair or replace that product
or part, at GMP's option, returned freight prepaid to Trevose, PA.
3c. To obtain repair or replacement service under the Limited Warranty, the purchaser must contact the factory
for a Return Material Authorization (RMA). Once obtained, send the RMA along with the defective part or prod-
uct, transportation prepaid to:
3d. The field labor and material charges incurred by an authorized GMP dealer or an end user to disassemble,
inspect, repair and reassemble our product or part at their respective prime locations will not be reimbursed
unless GMP has first reviewed and approved those charges.
3e. Incidental repair charges incurred by an authorized dealer or an end user for items such as labor, transpor-
tation, tolls, lodging and meals at a location remote from its prime facility, or to demount our product or part from
its remote location and forward to its prime facility, are not the responsibility of GMP, and are not covered by this
Warranty.
3f. Incidental repair charges incurred by an authorized GMP dealer or end user to remove construction hard-
ware, modify a vehicle or otherwise gain access to GMP's product or part, is a condition beyond GMP's control,
and is not covered by this Warranty.
GMP Limited Warranty
General Machine Products Co., Inc.
3111 Old Lincoln Highway
Trevose, PA 19053 USA
Tel: [phone]
Fax: [phone]
Email: [e-mail]