Table of Contents 1.For your Safety ............................................................................................................................... 2 2.Mobile Phone Profile...................................................................................................................... 3 3.Preparation before Use .................................................................................................................. 4 4.General Instructions for Mobile Phone .....................
1.For your Safety For your safety and for proper use of the mobile phone, please read the following guidelines carefully: Do not switch the mobile phone on when close to chemicals, gas stations or other explosive materials. During driving, please use the headset for safety purpose; otherwise in cases of emergency, always stop the car by the roadside to have a call conversation. Because the use of the mobile phone can cause interference in the aircraft, never use the mobile phone in aircraft.
Our company keeps the right to make modifications to any of the content here in this user guide without public announcement in advance. The content of this manual may vary from the actual content displayed in the mobile phone. In such case, the latter shall govern. 2.Mobile Phone Profile The mobile phone has 17 keys on the keypad. In addition, it is inbuilt with one vibration motor, one charger/data common transmission port.
3.Preparation before Use Install SIM Card When registering mobile phone number, you can apply for two different phone numbers, two different mobile phone network service providers and thus obtain two SIM (Subscriber Identification Module) cards. With these two SIM cards, you can use all functions of your mobile phone. The SIM cards save the parameters needed for communications and personal data, including PIN (Personal Identification Number) code, phonebook, short message and other extra system services.
T-Flash card Note: As the T-FLASH card is small object, keep it out of children’s touch or prevent children gulping it! Install Battery The mobile phone is suitable for original battery and accessories. When the battery is idle, it is recommended to put it into the protection box. Follow the following diagram to install the battery. Battery Note: Do install the battery as per the diagram so as prevent the battery contact patch being damaged.
After the battery is charged full, the icon is full of bars. Slight heat during charging is normal. Warning: When a travel charger and its accessories are used to charge the battery, please firstly check if they are original or recognized by the original manufacturer. The use of other accessories may damage your mobile phone and cause risks! Always use them indoor and in dry places.
Warning: If the PIN code is input wrongly for successively three times, the SIM card will be locked. Please contact the network operator immediately for help. Attempting to unlock the code may make the SIM card ineffective forever! 4.General Instructions for Mobile Phone SIM 1 Dial key It is used to have SIM1 call (when the phone number is input or in phonebook state) and receive SIM1 incoming call.
Press these keys to input phone number, password, English letters, symbols etc, or choose menus. Note: In standby state, hold “1” key long to call the voice inbox service center. The number for the voice inbox should be preset. In different states or different functional menus, * key and # key have different functions: Press “#” key long to start or exit from the silence mode.
Host line 2 Slave line 2 MMS: the SIM1 MMS has“1“on the icon while the SIM2 MMS has “2“on the icon. PUSH Inbox GPRS All calls diverted: the host has“1“on the icon while the slave has “2“on the icon. Language and Input Mode The mobile phone has defaulted English and Turkish input mode. Call hint The mobile phone is inbuilt with vibration motor and buzzer and provides several incoming call modes: Ring only Vib. only Vib. and ring Vib. then ring Light only Services Services are provided with SIM kit.
Some fixed-line telephone extension may not directly get through, so you need to connect to the switchboard at first then put through extension number. The mobile phone can automatically dial extension number if you input “P” between the switchboard and extension number. Method for input “P” as following: hold press or continually short press three times “*” key (“P” will be shown on the display).
Switch off To switch off the mobile phone, press the end key. When the screen displays switch-off cartoon, the host and the slave will be off at the same time. Do not take out the battery to switch off the mobile phone. If so, the SIM card can be damaged easily and some data will be lost. Dial a Call With the number keypad, you can enter phone numbers (if wrong characters are input, press the clear key to delete them). Press the dial key to dial the phone number.
Fast Read SMS When the user receives unread SMS, the screen will display an icon of unread SMS. Press Read to enter and read the SMS. The SIM card 1 unread SMS icon is marked with “1” and SIM card 2 unread SMS icon is marked with “2”. Missed Calls When there have a missed call incoming, the screen will display a missed call icon. And press Read to enter and read missed call.
melody, Predefined sound into SMS. However, the SMS will not be received and displayed unless the network and the receiving mobile phone support. You can enter the phone number or choose a number from the phonebook to send the SMS. In dual-SIM standby mode, you can choose to send the SMS via SIM1or SIM2. When you press Options , you can do such operations as follow: Use templates : You can pre-edit some common phrases, which is convenient for quick SMS editing.
the SMS and what the time is. Reply path: You can send the reply path to the network terminal. This function needs the support from the SMS center. Memory status: You can view the capacity of the SIM card or the phone for SMS. Preferred storage: You can set the storage position (SIM or phone) for SMS. New SMS Rule: You can set is as Single Shift/Locking shift/Deactivate. [MMS] MMS can contain words, sound and photos. If the MMS is out of the limit, the mobile phone will be unable to receive the MMS.
Forward: You can directly forward this MMS to others. Delete: Delete the current MMS. Delete all: You can delete all MMS in inbox. Save as template: You can save the MMS as template. Properties: View the detailed information of the current message. Use details: You can extract the number in the MMS and save it or dial a call. You can also use the URL in the MMS.
have the following settings: Activate account. View account: You will view the Account name, MMSC address, Data account, Connection type, User name and Password of the account. Memory Status: You can see the utilization rate of the mobile phone, including the used space and the usable space. [Chat] You can have a chat in the chat room which you had selected or preset its information such as my nickname, destination num.
phone number. On the phone, one contact can include Name, Number, Home Number, Company Name, E-mail Address, Office Number, Fax Number, Birthday, Associate Photo, Associate Sound and Caller Groups. Tip: If one contact is set with photo link, tone link and callers group at the same time, then the caller groups function will be inactive. [Copy All] You can copy all contacts from SIM1 to phone, from phone to SIM1, from SIM2 to phone, from phone to SIM2, from SIM1 to SIM2 and from SIM2 to SIM1.
Reset cost: With this function, you can clear all fee records. PIN2 code must be input to set call cost. Max cost: With this function, you can limit call fees in the specified pricing unit or currency unit. PIN2 code must be input to set call cost. Price per unit: This function needs network support. For more details, please consult the network operator. [SMS counter] With this function, you can see and reset the number of sent messages and received messages .
New folder: Under the root directory, you can create a new folder to save more detailed files. Format: Formatting can clear all files in the mobile phone and newly created folders. After formatting, you need to restart the mobile phone and the Audio folder and Images folder will restore automatically and Photos folder will automatically occur after the first photo is taken. [Memory Card] Open: You can open the files in the memory card.
online Bluetooth devices. About: Here, you can see the name of my device, device address and the Bluetooth services supported by my device. Tip: When searching Bluetooth devices, make sure that the peripheral Bluetooth devices are within the signal cover range and can be searched. To match the searched devices, you need to discuss with the user of this device about a pair of matching passwords. To match the hand-free device, you must input its matching password.
Photos To view the saved photos. Banding: 50Hz, 60Hz(default) Camera Settings Delay Timer: 5s, 10s, 15s or Off. Cont Shot: Single. Size:128*96,352*288. Image Settings Quality: High, Normal, Low Scene Mode Auto, Night Storage Phone, Memory Card Restore Default You can restore the recorder to factory settings. [Image viewer] All photos taken are saved in the album. Options Description View You can view the selected photos. Browse Style There are two browse styles, i.e. list and matrix.
Rename You can rename the specified video. Delete You can delete the specified videos. Delete All files You can delete all files. Sort by You can sort these videos by Name/Type/Time/None. Storage You can choose video storage path (to phone or memory card). [Audio player] If the operation system is Windows 2000 above, no driver needs installing.
start time is reached, the radio recording will start automatically. Alarm clock: You can choose Radio in the sound options, thus when the alarm clock time is reached, the radio will be played. [Schedule Radio Recorder] Set the start time and end time etc for the recording, thus when the start time is reached, the radio recording will start automatically. You can also set the repeat as: once, everyday, days, weekly, monthly, and set the channel list then select it.
Flight mode [Phone Setup] In such menu, you can set phone language, standby wallpaper, time etc. Time and date: With this function, you can set home city, time and date format and the time of specific place. Set Home City: You can set different cities. Note: This option must be used together with auto update of time and date. Auto update of time and data cannot be conducted unless the network supports. Set Time and Date: You can set the current time and date.
network operator for it. With this function, you can divert calls meeting the conditions to another number. Name Description Divert all voice calls The network will divert all voice calls without conditions. When the network cannot find your mobile phone Divert if unreachable (switched-off or out of the service area), it will divert the calls. When the mobile phone does not answer the call, the Divert if no answer network will automatically divert it.
[Network Setup] In dual-SIM standby mode, you can separately set SIM1 network and SIM2 network. Network selection: You can search the network again. Select your favorite network and choose to register the network automatically or manually. Preferred network: You can set the preferred registered network for SIM card. [Security Setup] Security setup: In dual-SIM standby mode, you can separately set the SIM lock, Fixed dial, Barred dial and Change password.
have such operations as Add, Delete, Delete all and Send vCalendar. Add task: You can select task type and then edit it. The task types are as following: Reminder, Meeting, Course, Date, Call, Anniversary. Jump to date: You can move to the calendar of the specified date. Go to weekly view: You can view the whole tasks in one week. The next time you can view the whole tasks in one month by choosing Go to monthly view.
network supplier. According to the services the SIM card provides, there will be new menu options occurring. If the SIM card and network do not support this function, it will not be inactive. For more details, please contact the network provider. [WAP] Homepage-- Start the website chosen in the connection settings file. Bookmarks--yahoo. Enter the options menu and have the following operations on the bookmark: Go to: Log into the chosen website. Edit: Edit the chosen bookmark name and website.
Password: wap Line Type: ISDN and Analogue. Speed: 4.8 Kbps, 9.6 Kbps, 14.4 Kbps DNS: 000.000.000.000 GPRS-- The use of GPRS data will be provided with the following ID information, such as Turkcell GPRS Account Name: Turkcell GPRS APN: wap User Name: gprs Password: gprs Auth.type: Normal or Secure. Note: For related charging standard and detailed settings, please consult the local network service operator. Different network service providers provide different services.
9.Appendix 1 Troubleshooting Phenomena Unable to switch on SIM failed Poor signals Unable to dial out Unable to charge the battery Unable to network register to the Photos taken are too dark Photos taken are too unclear Photos taken is distorted Unable to access service menus. Only part of the photo set as standby photo can be seen. Possible Causes 1. Does the battery have power? 2. Is the battery placed correctly? 1. The SIM card is dirty. Clean it. 2. Reinstall the SIM card. 3.
10.Appendix 2 Abbreviations and Definitions SMS Short Message Service EMS Enhanced Message Service SIM Subscriber Identity Module GSM Global System for Mobile Communication PIN Personal Identity Number PUK PIN Unblocking Key IMEI International Mobile Equipment Identity CB Cell Broadcast GPRS General Packet Radio Service MMS Multimedia Message service Card 1 SIM1 card (the card inserted in SIM1 slot) Card 2 SIM2 card (the card inserted in SIM2 slot) 11.
phone and the USB port may be damaged. T-Flash card It is recommended to use eligible T-Flash card, because the use of ineligible products may damage the T-Flash memory card slot.