Operation Manual

20
online Bluetooth devices.
About:
Here, you can see the name of my device, device address and the Bluetooth services
supported by my device.
Tip: When searching Bluetooth devices, make sure that the peripheral Bluetooth devices are within
the signal cover range and can be searched. To match the searched devices, you need to discuss
with the user of this device about a pair of matching passwords. To match the hand-free device, you
must input its matching password. After matching, this device will be saved in my device .
Use Bluetooth to Receive/Send Data:
1. Open the applications needed to save the content to be sent. For example, to send photos to
another compatible device, you should enter the album or file management.
2. Choose the content to be sent, and then choose Options->Send->To Bluetooth. The screen will
display the device supporting Bluetooth wireless technology and within the signal coverage. To
disconnect search, choose “Cancel”.
3. Choose the device to be connected with.
4. If another device requires matching before data transmission, the device will send hint and
require inputting matching password.
5. After the connection is established, the mobile phone will display data transmission speed.
6. When other Bluetooth devices send data to my service, the mobile phone will hint and ask
whether to receive the data. The received data will be stored in the initially set received folder.
Tip: You can set the storage position to receive files as other folders or the folders on T-flash card.
After setting, the file received via Bluetooth will be automatically saved to the specified folder.
Tip:
 The function of using Bluetooth headset for calls is limited to only host (SIM1) call or slave
(SIM2) call. If alternate SIM1 and SIM2 calls are available, this function will not be
supported.
 Before using Bluetooth headset for calls, please go to the menu settings to confirm that the
audio path has been set as hand-free device.
Use the following methods to disconnect:
 Close the activated Bluetooth to disconnect all devices.
 Enter online devices and disconnect the specified online service.
 Enter my devices and delete the matched devices to disconnect other devices with my
device.
 The connection with the devices out of the signal coverage will be ineffective.
[Camera]
With this function, you can use the inbuilt camera to take photos. The lens of the camera is
located on the back of the slide and the screen is used as the viewing window. All photos taken are
in JPG form. After downloading the photos onto PC, you need some software to view them.
If the storage space of the mobile phone is insufficient to store the taken photos, it is necessary
to delete some old photos or other files in “File Management” function list to release more space.
Description of Mobile Phone Options:
Options
Description