Operation Manual

1
AC Adapter
Recharge the device battery.
2
USB Cable
Connect your device to PC and synchronize data.
3
Headset
Provide a Talk/End button. You can use the button to pick up and
hang up incoming and outgoing calls. To use it, plug into Earphone
Jack.
4
Getting Started CD
Contains further documents and software to synchronize your device
to your PC.
5
User Manual and
Quick Start Guide
Instructions for device functions.
6
Battery
Rechargeable Li-ion polymer battery.
1.2 Inserting the SIM Card
Follow these steps to insert a GSM SIM (Subscriber Identity Module) card which is
provided by your local network service provider. The SIM card may contain your
phone number, service details, and phonebook/message memory.
Your device supports SIM cards both 1.8V and 3V. Some legacy SIM cards will not
function within this device. The customer should consult with their service provider
for a replacement SIM card. There may be a fee for this service.
1. Always switch the device off, and disconnect the charger before removing the
battery.
2. Press the cover latch and slide the back cover to remove it from the phone.
3. If the battery is installed, use the finger grip to lift the battery from the battery
compartment. Then, insert the SIM card into the SIM card slot with its gold
contacts facing down (the cutoff corner of the SIM card should match the cut-off
corner in the device.