Operation Manual

To make your device visible
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Select the Turn on Bluetooth check box and the Make this device visible to
other devices check box in Mode tab
3. Tap OK.
Note To Select the Make this device visible to other devices check box also
turns on Bluetooth.
Bluetooth partnerships
A Bluetooth partnership is a relationship that is created between your device and
another Bluetooth-enabled device in order to exchange information in a secure
manner. To create a partnership between two devices involves entering the same
personal identification number (PIN) or Passkey on both devices. To create a
partnership between two devices is a one-time process. Once a partnership is
created, the devices can recognize the partnership and exchange information
without entering a PIN again. Make sure the two devices are within a range of 10
meters from one another with Bluetooth on and visible.
To create a Bluetooth partnership
1. On your device, tap Start > Settings > Connections tab > Bluetooth.
2. On the Devices tab, tap Add new device. Your device searches for other
Bluetooth devices and lists them in the box.
3. Tap the desired device name in the box.
4. Tap Next.
5. Enter a passkey to establish a secure connection. (The passkey must be
between 1 and 16 characters.)
6. Tap Next.
7. Enter the same passkey on the other device, and possibly to edit and enter a
new name for the other device.
8. Tap Finish.
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode
2. Make sure that ―Receive all incoming beams‖ is enabled in Start >
Settings > Connections tab > Beam.
3. Tap Yes when portended to establish a partnership with the other device.
4. Enter a passkey (the same passkey that is entered on the device requesting
the partnership) to establish a secure connection. The passkey must be between
1 and 16 characters.
5. Tap Next.
6. Tap Finish to start exchanging information with the other device.
To rename a Bluetooth partnership
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Edit.
4. Enter a new name for the partnership.