Operation Manual

3. Use the [TEMPO-DATA] buttons to set the function to ON.

If you want to deactivate the function, press the [TEMPO-

DATA] again.

4. Press both [ESC] buttons to escape from MIDI Mode.

Bass Follow

Generally, the Bass accompaniment plays the notes that you

play on the keyboard. This is the case when the BASS FOL-

LOW function is ON. If you want the Bass section to follow

only the programmed pattern of the Style, without including

“additional” notes played on the keyboard, you should set BASS

FOLLOW to OFF.

Harmony

This function allows you to harmonise the melody you play

with your right hand with the chords you play with your left

hand.

Activating Harmony

1. Press the [HARMONY] button (LED lights up).

2. The LED of the button [SPLIT] lights up automatically. The

Freestyle function is set automatically to OFF.

In this way, the keyboard has been split into two sections:

the Upper section for the melody and the Lower section for

Harmony, Digital Effects, Master Tuning

the chords.

The keyboard must be split in this way, regardless of the

On/Off status of the Lower section.

Using Harmony

Play a melody with your right hand and at the same time play

a note or a chord with the left hand.

The chord of the left hand is united in harmony to the melody

of the right hand.

Deactivating Harmony

Press [HARMONY]. (LED turns off).

1. Press the two [MIDI] buttons simultaneously to enter MIDI

Mode.

2. Scroll the “pages” forward with [PAGE>] until you reach

BASS FOLLOW:

3. Use the [TEMPO-DATA] buttons to set the function to OFF.

To reactivate the function, press [TEMPO-DATA].

4. Press both [ESC] buttons to escape from MIDI Mode.