Catalog 119 MADE IN USA
Power Drain Cleaner Comparison Chart Super-Vee Power-Vee Handylectric Typical Applications For Use in Following Maximum Operating Pipe Sizes Capacity Weight Maximum Recommended Distance Motor Horsepower 16 lbs. with 25 ft. x 3/8" 3.2 amp 35 ft. x 3/8" or Sinks, Pages 4 – 8 (7 kg) 1-1/4" – 3" 50 ft. x 1/4" or 5/16" 50 ft. Bathtubs, Drain-Rooter PH (30 mm x 75 mm) (10.5 m x 9.5 mm) (15 m) Roofstacks Page 9 34 lbs. (15 kg) (15 m x 7.9 mm) DRZ-PH 30 lbs.
General’s Limited Warranty & Index General’s drain cleaning machines, Jet-Set water jets, Gen-Eye Micro-Scope, Gen-Ear LE water leak locators, and Cold-Shot Pipe Freezing Kits carry a one year limited warranty against defect or breakage except as noted below.
Super-Vee ® The Small Line Specialist The Super-Vee offers you a complete system for cleaning drain lines through 3" in diameter. With a variety of cables, cutters, and accessories available, you have the right combination for any clogged drain problem. The Super-Vee is built to clear clogged drains for a decade or more. And our Dyna-Thrust™ bearing system is one reason why. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool.
Small Line Drain Cleaners 1-1/4" – 3" Slide Action Chuck and Cartridge Refill Cables Cartridge Refill Change cables faster by changing cartridges. They’re convenient, clean, and inexpensive. Specifications: Motor: All ball-bearing, double-insulated, reversible motor with variable speed control; 0-500 rpm. 230 and 240 volt units available. Drum: Heavy gauge stamped aluminum with inner drum to prevent cable tangling. Capacity: 50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable.
Power-Vee ® With Power Cable Feed – Works Great in Tight Spots When working under sinks or in other awkward places, the Power-Vee is like having an extra hand. Just squeeze the feed lever, and three offset rollers in the automatic feed grip the cable and drive it into the line. It’s easy to use. To feed the cable, start the PowerVee motor and squeeze the feed lever; to retract, reverse the motor and squeeze. The Power-Vee feeds 3/8" cable at 16 feet per minute.
Small Line Drain Cleaners 1-1/4" – 3" Flexicore® Cable Wire Rope Center Construction Cartridge Refill Change cables faster by changing cartridges. They’re convenient, clean, and inexpensive. Heavy-gauge wire coiled tightly around 49-strand aircrafttype wire rope and heat treated. Has unequalled strength and the right amount of flexibility. So tough it carries a one-year warranty against defect or breakage. MCC Carrying Case For Super-Vee, Power-Vee and Handylectric. Flexicore Patent Nos.
Handylectric ® Economical Price – Quality Features The Handylectric is a tough, easy to use tool for cleaning lines up through 3". It can use all of the accessories available for the Super-Vee, except the plastic cartridges. Cables are gripped securely by a patented Quick-Grip™ chuck that tightens firmly on the cable with just a quarter turn. Three chuck jaws securely hold 1/4", 5/16" and 3/8" Flexicore ® cable for a wide range of small-line jobs.
Drain-Rooter PH ™ The Clean Machine Small Line Drain Cleaners The Drain-Rooter PH is a real labor-saver on long jobs, or when working in cramped areas where the weight of the machine could be burdensome. Equipped with a variable speed power cable feed and variable speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier. The drum speed can be varied by changing the pressure on the foot pedal.
Model DRZ-PH ® Quiet, Clean, Quick Looking for a cleaner way to clean drains? The Model DRZ-PH is the answer. Light and powerful for a machine of its size, the Model DRZ-PH is ideal for clearing clogged sinks, tubs, and laundry drains in 1-1/4" to 3" drain lines up to 50 feet long. The variable speed power cable feed gives you complete control as it feeds and retrieves the cable at up to 16 ft. per minute.
Kinetic Water Ram ™ Open Clogged Pipes with Shock Action Small Line Drain Cleaners Here’s a compact, lightweight tool for quickly opening clogged sinks, toilets, and tubs. It handles rust, grease, sediment, and scale in lines up through 4" in diameter. 1-1/4" – 3" The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up the stoppage.
Mini-Rooter Pro ® Now with Wheels and Folding Handle The Mini-Rooter Pro clears drains from rooftop to basement, including kitchen, bath, and laundry drains. And it’s portable too: Built-in wheels make it easier for you to transport the Pro to and from the job, and the folding handle allows for compact storage in your truck. This inexpensive, lightweight machine has lots of timesaving features.
Catalog Number MR-250 Built-in Dolly Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job. Removable Drum You can take the drum off the Mini-Rooter Pro. Folding Handle The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck. Specifications: Weight: 43 lbs. (19.5 kg) without cable. Dimensions: 20" D x 16" W x 38" H. (20" H with handle folded). (51 cm x 41 cm x 46 – 51 cm). Drum: Capacity of 75 ft.
Mini-Rooter XP ® Extra Portibility and Performance The Mini-Rooter XP gives you extra portability because 8"semipneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps.
Medium Line Drain Cleaners 2" – 4" Power Cable Feed A variable speed power cable feed attachment makes feeding and retrieving the cable much easier. It quickly adjusts between 3/8" and 1/2" cables without the need for tools or additional parts. J-Drum With a J-Drum, you’re ready for small drain work in seconds. Equipped with a patented Quick-Grip™ chuck that tightens firmly on the cable with just a quarter turn. Will hold any Super-Vee cable.
Sewerooter T-4 ™ Performance, Durability, Portability Improved Performance The new Sewerooter T-4 does a better job of clearing inside drain lines up to 100 ft. long with 9/16" Flexicore cable. It has more torque than traditional 1/2 inch cables, yet it can be used to clear the same 3" to 4" drain lines. Need to clear tree roots too? Just switch drums to a 75 ft. x 5/8" Flexicore cable to clear 3" to 6" lines.
Folding Handle The handle is tall enough to make it easy to move to the job, yet quickly folds to take less room in your truck. Specifications: Weight: 92 lbs. (42 kg) without cable. Dimensions: 27" (68.5 cm) deep, 18-1/2" (47 cm) wide, 46" (117 cm) high; 26" (66 cm) with handle folded down. Drum Capacity: 100 ft x 9/16" (30 m x 14.2). 75 ft. x 5/8" (22.5 m x 15.8). Drum Removal: Remove one bolt and slide drum off shaft. Motor: 1/3 hp with capacitor, forward-off-reverse switch 20 ft.
Speedrooter 92 ® Job Tested Tough Contractors know that the Speedrooter 92 can really take a beating – from its frame braced at key stress points, to General’s exclusive Flexicore® wire rope center cable that’s so tough it carries a one-year warranty. The Speedrooter 92’s field tested design offers easy handling. One person can load it onto a truck, as the machine slides smoothly from the loading wheel, to the handle, to the stair climbers, and finally to the wheels.
Large Line Drain Cleaners 3" – 10" V-belt Stair Climbers V-belt stair climbers like the ones used to move heavy furniture and appliances let you take the Speedrooter 92 up a flight of stairs yourself. Truck Loading Wheel One person easily loads the Speedrooter 92 onto a truck. Specifications: Weight: 115 lbs. (52 kg) without cable. Wheels: 10" Heavy-duty wheels with roller bearings. Dimensions: 26" deep, 22" wide, 41" high (66 cm x 56 cm 104 cm).
Speedrooter XL ® Long Distance Power – Easy Drum Changes With easily interchangeable drums, the Speedrooter XL gives you long distance clog-busting power in 3" to 10" lines – up to 200 feet. The rugged, easy-to-maneuver Speedrooter XL sports a powerful 3/4 hp motor to drive the cable down longer runs and clear tough stoppages. Change drums to add cable lengths or swap cable sizes with ease.
Specifications: Weight: 115 lbs. (52 kg) without cable. Dimensions: 26" deep; 22" wide; 41" high, (66 cm x 56 cm x 104 cm). Large Drum: Equipped with inner drum cage and distributor tube. Holds 100 ft x 3/4" or 5/8" cable. Small Drum (Optional): Equipped with inner drum and distributor tube. Holds 100 ft. x 1/2" cable. . Drum Removal: Loosen three knobs and lift drum off frame. A smaller V-belt is required for the small drum and is standard with the PSXL-A.
Maxi-Rooter ® Root Cutting Power Plus Big Capacity The Maxi-Rooter combines root cutting power and big capacity in a surprisingly portable machine. A heavy-duty 3/4 hp motor with capacitor start and over-load protection drives a drum that can hold 125 ft. of 3/4" cable or 150 ft. of 5/8" cable. The frame is a tough aluminum alloy. Look at the portability that goes with that power and capacity.
Flexicore® Cable Wire Rope Center Construction Large Line Drain Cleaners 3" – 10" Lift Handles For easy truck loading, tip the Maxi-Rooter on its loading wheel, then lift and slide into truck using lift handle on front leg of machine. Convenient Tool Box A tool box large enough to hold a set of cutting heads and some tools is built into the back of the Maxi-Rooter. Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated.
I-95 ® It’s Three Machines in One Here’s a sectional cable machine that drives 7/8" and 5/8" sections – or even 5/16" cables for small drain work. You switch from 7/8" to 5/8" and back by repositioning the chuck cone. No adapter required. Attach a small drum to the back of the machine to drive smaller cables. The I-95 gives you power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables.
Root 66 ® Uses Sectional Cables for 1-1/4" thru 4" The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines – and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drain work, slip on a drum that holds smaller cables.
Model 88 ™ You Walk While It Works This machine is almost as easy to operate as a lawn mower. You push eight or ten foot cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line. The Model 88 handles jobs up to 200 ft.
Cable Feeding Tool It enables cable to get around tight bends and traps by taking advantage of open-wound design of cables. Note that operator controls machine by using power switch in foot pedal mode. Pneumatic Power Switch Air-actuated for safety. There is no electrical connection between switch and motor. Switch can be removed from handle and used as a foot pedal when working with the cable feeding tool.
Rodrunner ® Self-Feeds Reinforced Sectional Cables The Rodrunner offers all the features that contractors like in a sectional sewer cleaner – light weight, high speed cable rotation, and short, quick-coupling cables. Two Way Operation Set the Rodrunner up close to the drain opening, or on easier jobs where you have some working room, you can run the machine “lawn-mower” fashion, standing behind the machine.
Rodrunner Model E ® Drives Municipal Rods or Sectional Cables The gasoline powered Rodrunner Model E is ideal for cleaning long runs up 500 ft. down the line. It can be coupled to either 10 ft. sectional cables to clear up to 14" lines, or 5/16" municipal rods to clear up to 24" in diameter. The operator stands behind the machine and walks the cable or rods into the line. It’s driven by a powerful 208 cc Briggs and Stratton engine.
Cutters AH Arrow Head Starting Drill For 5/16", 3/8", 1/2" and 9/16" cable. 1-1/4" SCB 1-1/4" Side 1/4" and 5/16" Down Head Cutter Blades Leads cable down the stack – not up. For cutting and scraping. For 1/4" and 5/16" cable. For 5/16" and 3/8" cable. FAH Flexible Arrow Head For sharp turns in small lines. For 5/16" and 3/8" cable. DHBG Down Head Boring Gimlet Goes down waste, not up the stack. For 5/16" and 3/8" cable.
Cutter Set for 7.5R7, 7.5R8 – 5/8" Sectional Cables R-AH Arrow Head Starting Tool R-1-1/2 UC 1-1/2" U-Cutter For cutting and scraping. R-BG Boring Gimlet For removing loose objects. R-RTR-1 Corkscrew Retrieving Tool For removing loose objects. Cutter Set for 15R10 – 7/8" Sectional Cables R-HA-10 Hook Auger For breaking up stoppage and retrieving. R-SHD-10 Spear Head R-2UC-10 2" U-Cutter For cutting and scraping. R-3UC-10 3" U-Cutter For cutting and scraping.
ClogChopper ® Revolutionizes Drain Cleaning Rip through tough stoppages with the unique ClogChopper multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage. The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls.
Accessories Snake Oil Plus™ Rust inhibitor and deodorizer protects your sewer cables and equipment. Keeps debris from sticking by creating a virtually non-stick surface. Great for use on concrete and construction equipment, and more. Lemon Scented–100% Biodegradeable–Eco Friendly. Catalog Number Description SOQ SOG SOG-S 1 Quart w/Sprayer 1 Gallon 1 Gallon w/Sprayer SIG Splash/Impact Goggles Can be worn over glasses. QF “Quick Fix” Repair Coupler Just screw on tightly and it won’t come off.
JM-1000 Electric Water Jet Mini Jet – Mini Price The lightweight, compact JM-1000 Mini-Jet gives you 1500 psi of cleaning power, yet weighs just 23 lbs. Clear grease, sand, and ice from 1-1/2" to 3" lines. The pump and motor assembly are safely contained in a rugged metal diamond plate case that can handle abuse in the field. Water jets use a stream of high pressure water that hits the stoppage and flushes it away.
JM-1450 Electric Water Jet Compact! Portable! Powerful! The powerful JM-1450 electric water jet gives you as much pressure as you can get from an electric jet. It generates 1500 psi at 1.7 gallons per minute, yet only pulls 13 amps. It’s powered by a 1-1/2 hp dual capacitor enclosed motor with an in-line ground fault circuit interrupter. The JM-1450 features Vibra-pulse® on demand to help the hose slide around tight bends in small lines.
JM-2900 Gas Water Jet Big Machine Power at a Bargain Price The JM-2900 is an economical alternative to larger gas jets. It’s lighter and more maneuverable, yet maintains the same pressure and flow rate of its big brothers. It’s driven by a 389 cc Honda engine connected directly to a 3000 psi, 4 gallon per minute triplex pump with Vibra-pulse® on demand. The 200 ft.
JM-3000 Gas Water Jet Solid Performance in the Toughest Conditions Built to take heavy use and abuse, the powerful JM-3000 is great for clearing large lines and long runs. A heavy duty 3000 psi, 4 gpm triplex pump with Vibra-pulse® on demand is driven by a reliable 389 cc Honda engine with electric start through a 2 to 1 gear reducer to extend the life of the pump. The JM-3000 is well balanced for easy handling.
JM-3055 Gas Water Jet The Most Flow You Can Get Without a Holding Tank The JM-3055 has the power to clear your most stubborn stoppages, including grease, sand and ice. Its 3000 psi, 5.5 gpm triplex pump has the thrust to pull the hose down long runs, the pressure to cut through tough stoppages, and the flow to flush them away. In fact, the JM-3055 has the highest flow rate available without requiring a holding tank. It’s driven by a 480 cc Briggs and Stratton Vanguard engine with electric start.
JM-3080 Gas Water Jet Get High Water Flow Without a Trailer The JM-3080 gives you the increased cleaning power of 8 gpm without risking pump damage if your water supply can’t match the pump demand. A 12 gallon buffer tank gives you the safety margin you need when using a high flow water jet to clear larger and more difficult lines. A 614 cc Honda engine with electric start drives a 3000 psi pump through a 2 to 1 gear reducer.
JM-2512 Typhoon ® Water Jet Big Cleaning Power in a Tough New Package The JM-2512 Typhoon® trailer jet is ideal for clearing big lines or remote jobs far from a water source. Twelve gallons of water pulsates down the line every minute at a powerful 2500 psi to blast lines clear of grease, sediment, and debris. The 200 gallon holding tank carries enough water to handle remote applications where access to water is limited.
Splash Guard 2500 psi, 12 gpm pump with Vibra-pulse® 690 cc Honda Engine 200 Gallon Tank Safety Strobe Light Specifications: Pump: Triplex w/Vibra-pulse® Pressure: 2500 psi Flow: 12 gpm Engine: 690 cc Honda w/Low oil shut off, electric start, and V-belt reducer Tank Capacity: 200 Gallons Jet Hose Reel: Electric variable speed rewind, swivel, 400 ft. x 1/2" hose capacity Supply Hose Reel: Manual, swivel, drag brake, and reel lock, 150 ft.
Jet-Set Accessories ® CM-300 Cart-Reel™ The optional Cart-Reel is a must for professionals. It lets you use the power of the gas jet in buildings and confined spaces where exhaust fumes could be hazardous, while the gas jet stays safely outside. The Cart-Reel comes with two, 10 inch “Flat-Free” foam core tires, 300 ft. capacity hose reel, reel brake, gauge, and a shut-off valve. HM-200-W Handy-Reel™ with Foot Pedal For use with any jet, the compact 200 ft.
Jet-Set Nozzles and Hoses ® Nozzles Whether you’re up against grease, sand, or ice, there’s a General nozzle that will cut through it. Some are designed for maximum penetrating power, some are designed to pressure wash the pipe walls, and some are designed to go around sharp bends. All of General’s nozzles are made of hardened stainless steel to last longer. Powerful penetrating nozzle cuts through grease and ice. Wide spray flushing nozzle cleans inside of pipe thoroughly.
Gen-Eye POD ® Now With Wi-Fi inside Always easy on your back and your budget, the versatile Gen-Eye POD ® video pipe inspection system now features Wi-Fi inside. Wi-Fi lets you use your own tablet or smartphone to record the inspection and send it to your customers on the spot or back at the shop. Now Wi-Fi Capable! The lightweight, compact Gen-Eye POD combines camera, reel and monitor in an all-in-one package.
Gen-Eye X-POD ® Inspection Results in a Flash! The Gen-Eye X-POD video pipe inspection system features a powerful Command Module loaded with lots of great stuff. Always easy on your back and your budget, the versatile Gen-Eye X-POD includes a USB port to record on a flash drive. The Command Module also includes a 3 ft. Probe Rod with color camera for inspecting duct work, furnaces, crawl spaces and more. Three adapters are included to improve your viewing angle or to retrieve objects.
Gen-Eye USB ® ® Premium Video Pipe Inspection System The Gen-Eye Series USB-W packs the features of the Gen-Eye SD Series into a compact package, plus a USB port to record on a flash drive and Wi-Fi inside. It has up to 128 GB of USB recording capability, a 10.
Gen-Eye Micro-Scope2 ® Inspection results in the palm of your hand The Gen-Eye Micro-Scope2 compact handheld inspection tool features a new Command Module that includes a USB port to record onto a flash drive. You can watch the action on a big 7" LCD color monitor for crisp clear pictures and record videos or photos on the flash drive with the onetouch record button.
Gen-Eye Hot-Spot ® Digital Pipe Locator The new Gen-Eye Hot Spot pipe locator makes locating easier than ever. Its total field antenna array and on-screen icons lead you right to your target, without the long learning curve. Whether you’re an experienced pro or a first time user, you can quickly locate inspection cameras, sondes, active power lines and utility lines with pinpoint accuracy. No need to interpret numbers and bar graphs.
Hot-Spot Transmitter ® 5 Watts – 4 Frequencies Locating buried utilities used to be tough. Not anymore! With the powerful 5-watt Hot Spot transmitter, location is easier than ever. More power means more signal to locate. Choose one of 4 frequencies – 1KHz, 8KHz, 33KHz or 65KHz. You can select the frequency and power that best suits your application. Locate via direct connection using the cords and ground stake.
Gen-Ear LE ® Water Leak Location System Now, a smaller investment gets you a better method for tracking down water leaks. The new Gen-Ear LE is a simplified, more economical tool with stronger sound amplification than other systems. Use it to pinpoint water leaks in residential and commercial water lines, whether they are under concrete slabs, in walls, swimming pools or hot tubs. 1. Carrying The compact amplifier fits easily in the Case palm of your hand.
Components 1. Heavy Duty Carrying Case Made of high-density polyethylene. Designed to withstand heavy use and protect your investment. 2. Ground Sensor Finding the leak starts with a quality ground sensor. It locates leaks through hard surfaces, concrete, tile, etc. Threaded nipple accommodates sectional probe rods or magnet. Wind proof, shock resistant housing protects against handling noise interfering with locating process. Specifications: Amplifier: Input Impedance: 430k. Output Impedance: 4 – 10 Ohm.
D-25 Handy ™ Can Be Attached to a Drill The redesiged D-25 Handy now sports a durable new plastic container and a rugged new patented Quick-Fix™ chuck for maximum performance, flexbility, and reliability. Designed to take the toughest field abuse, General’s sturdy new plastic container has been drop tested from 8 feet – fully loaded – without damage.
Flexicore Drain Augers ® A core of aircraft-type wire rope makes Flexicore Augers so tough they carry a one-year warranty (see page 3). After coiling, they’re heat treated for maximum toughness and durability. Right-hand wind makes manual operation easier through greater flexibility. Bulb-Type Head Standard on 3/8" cables. 1/4" Diameter For sink traps, 1-1/4" lines, lavatory and bath drains, laundry tubs, etc.
Flexicore Closet Augers For the Professional Closet Auger Bag Closet Auger Bag keeps the closet auger contained and out of sight as it’s carried to and from the job. 3FL Three Foot Flexicore ® Professional 3 ft. Flexicore® Closet Auger is the ideal tool for breaking up stoppages or removing lost objects in clogged toilet bowls. Durable double layer Flexicore construction gives the snake tremendous resistance to kinking. The Flexicore closet auger works where plungers fail. 3/4" O.D. Steel Tube 15/32" O.
Closet Augers For the Do It Yourself Market Standard Closet Auger A 3/8" (10 mm) dia. snake and ring for attaching snake when not in use. Plastic bowl guard. Powder coated steel tube is 27" (69 cm long and 5/8" (16 mm) in diameter. Plated turning rod. Deluxe Closet Auger A 7/16" (11 mm) dia. snake. Equipped with plastic grip handle and bowl guard. Powder coated steel tube is 30" (76 cm) long and 3/4" (19 mm) in diameter. Plated turning rod. H-3NKH H-3RB Cat. No. H-3NKH Cat. No.
Drum Augers For the Do It Yourself Market Deluxe Spin-Thru ® Deluxe Power Spin-Thru ® This top of the line Deluxe SpinThru drum auger features a rugged steel drum. The 1/4" (6 mm) snake is fed out of the drum into the line, keeping it away from clean kitchen and bathroom surfaces. There is a “T” grip handle for more convient use in laundry tubs. Case Pack: 12 (Individually Boxed) Add a drill to make drain cleaning faster and easier.
Drain Augers For the Do It Yourself Market Increase drain auger sales by ordering Premium Drain Augers with attractive tamper resistant plastic display bags. Augers come with professional-style sliding crank handles with smoothly working hand grips. This feature gives the auger a more attractive, high quality appearence. Made from high tensile bright wire. 1/4" augers have a basin plug head for easy threading through strainer. 3/8" augers have a large bulb-shaped corkscrew boring head.
Sectional Sewer Rods Cutters for 1/4" x 6 Foot Rods All parts are coated to resist corrosion. SE-1 – Corkscrew for 2" Pipe Used to start water flowing. SE-2 – Diamond Head For small, grease packed waste line. SE-3 – Root Cutter Sheers tough roots and breaks up hard packed stoppages. SE-5 – Corkscrew for 4" Pipe For clearing roots, grease, and more. SE-6 – Pick-up Tool Retrieves broken rods or tools.
Flat Sewer Rod A Sturdy Tool for Cleaning Drain Lines and Sewers Oil tempered spring steel is resistant to rusting and kinking. The rod is bolted to the frame at the back, so it can’t spring out of the frame when you near the end. A comfortable, efficient Quick-Grip Handle makes the work go faster. Pipe Size Catalog Number Feet All sizes furnished with Quick-Grip Handle and Roller Head.
Hot-Shot TM Thaws Frozen Pipes Quickly No more tearing up floors, breaking through walls, or digging up pipes in frozen ground. Eliminate hazardous blow torches. With the safe Hot-Shot pipe thawer, you can accomplish the job faster and easier – and save time and money. Easy to Operate Just carry your Hot-Shot to the job, attach the pipe clamps and plug it into 115 volt receptacle. In minutes, the frozen pipe will be flowing again.
Flood-Guard ™ Prevent Basement Flooding Flood-Guard operates like a check valve to seal off water backup caused by overloaded sewers. Water flows normally through the drain until the sewer begins to back up. Then the FloodGuard float rises to seal off the drain opening until the water recedes. A screwdriver and a couple of minutes are all you need to install a Flood-Guard. Once in place, it can prevent Float Model property damage and a very messy clean-up job.
AutoCut ® Copper Tubing Cutter This is a great tool to have when you don’t have enough swing room to use a full-size tubing cutter. You can cut copper tubing with less than one inch of clearance. And it’s ideal for stub-out work. It’s quicker than conventional cutters. Just snap it on the tube, close the gate and turn. The cutter wheel automatically tightens as you turn the AutoCut – no knobs to twist.
VersaPlunge ™ Prevent Splash-Back Are your customers tired of messy, germ-laden splash-back from old-fashioned toilet plungers? Take the VersaPlunge! With its patented VersaFlange™, an extremely pliable cone, the VersaPlunge plunger easily conforms to just about any shaped toilet bowl opening, creating a tight seal in virtually any toilet design. It’s better than any other plunger on the market.
MADE IN USA © General Wire Spring Co.
