Product Overview

McKees Rocks, PA 15136 USA

800-245-6200 or 412-771-6300

www.drainbrain.com

AutoCut

Copper Tubing Cutter

This is a great tool to have when you don’t have enough swing

room to use a full size tubing cutter. You can cut copper tubing

with less than one inch of clearance. Or you can easily handle

close stub-out work.

And it’s quicker than conventional cutters. Just snap it on the

tube, close the gate and turn. The cutter wheel automaticaly

tightens as you turn the AutoCut – no knobs to twist. The cutter

wheel is spring loaded to provide a constant cutting pressure,

so you’ll never accidentally crimp the tubing.

For extra leverage in awkward

spaces, you can get a Ratchet

Turning Handle. It slides over

the AutoCut from either

side for maximum ease of

operation.

The AutoCut has long lasting

hardened steel cutting wheels

that are easy to replace when

the time comes. Keep all

three in your toolbox.

Watch out though, they’ll

spoil you.

Catalog Standard

Number For use with: Pack

ATC-12 Copper Tubing Cutter 1/2" (13 mm) copper tubing* 12

ATC-34 Copper Tubing Cutter 3/4" (20 mm) copper tubing* 12

ATC-100 Copper Tubing Cutter 1" (28 mm) copper tubing* 12

RH-12 Ratchet Handle ATC-12 1/2" Tubing Cutter 8

RH-34 Ratchet Handle ATC-34 3/4" Tubing Cutter 8

ATCW ATC-12, ATC-34 and ATC-100 12

Replacement Cutter Wheels

Tight clearance? The Ratchet

Turning Handle is a real knuckle

saver. Just slide it over the AutoCut

for extra turning leverage.

Do stub-out work closer to the

wall than conventional pipe cut-

ters because there’s no turning

handle to get in your way.

*Not for use with soft copper. AutoCut Patent No. 5903980 – Canada Patent No. 2187868