User Guide

Jet-Set JM-2900™
3
GENERAL SAFETY RULES
WORK AREA SAFETY
1. All installations must comply with local codes. Contact your
plumber, utility company or the selling distributor for specific de-
tails.
2. Risk of explosion. Do not spray flammable liquids or operate
in an area where flammable or explosive materials are used
or stored. Power tools create sparks which may ignite dust and
fumes.
3. Keep bystanders, children, and visitors away while operating
machine. Distractions can cause you to lose control.
PERSONAL SAFETY
1. High pressure developed by jet machines will cause personal
injury. Water spray should not be pointed at any person. High
pressure spray can result in serious injury. If fluid seems to have
penetrated the skin, seek emergency medical attention at once.
2. Grip jet hose or spray wand securely with both hands before
starting the machine. Failure to do so could result in injury from a
whipping hose or wand.
3. Always wear eye protection and rubber gloves. Safety equip-
ment, eye safety devices, non-skid safety shoes and protective
clothing must be worn when using this equipment.
4. Do not touch engine during operation. The muffler and other
parts of the engine get hot and can cause severe burns.
5. Do not smoke while filling engine fuel tank. Fumes can ignite
causing property damage and severe injury.
6. Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or medication. A mo-
ment of inattention while operating power tools may result in seri-
ous personal injury.
7. Dress properly. Do not wear loose clothing or jewelry. Con-
tain long hair. Keep your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long hair can be caught
in moving parts.
SERVICE
1. Tool service must only be performed by qualified service
personnel. Service or maintenance performed by untrained per-
sonnel could result in injury and damage to the equipment.
2. When servicing tool, use only identical replacement parts.
Follow instructions in maintenance section of this manual.
Use of unauthorized parts or failure to follow maintenance instruc-
tions may cause injury or damage to equipment.
JET SAFETY
1. Do not operate jet above rated pressure or above 140 degrees
(rated water temperature). Operating jet above rate specifica-
tions risks damage to the pump and related components, and will
void the warranty.
2. Do not operate jet with the output valve in the off position for
extensive periods of time. This will cause the water to overheat
and damage the pump.
3. Never run pump without water in it. Operating the machine
without water will cause the pump to fail and void the warranty.
4. Check for worn hose and components before each use.
Check that all fittings are secured before using jet. Worn or
lose fittings can cause damage to the machine and injure the op-
erator.
5. Protect machine and pump from freezing. Storing or operating
the jet in temperatures below freezing can damage pump, hose
and other jet components. Store unit indoors or protect with anti-
freeze when not in use.
6. General Wire Spring Co. will not be liable for any changes
made to our standard machines or any components not pur-
chased from General Wire Spring Co.
WARNING
Read and understand all instructions. Failure to follow all in-
structions listed below may result in electric shock, fire, and/or
serious injury.
SAVE THESE INSTRUCTIONS!
JM-2900 SPECIFICATIONS
400 ft. Capacity Hose Reel
Tool Box
Pressure
Gauge
Engine
Pulse Valve
Inlet Filter
Output Valve
Pump