User Guide

Gen-Eye SDN, SDW, SDP
®
Video Pipe Inspection/Location System
9
1. Make sure your SDW or SDP command module is ON.
2. On your cell phone, tablet, or other Wi-Fi enabled device, go to
the App Store (iOS) or Play Store (Android).
3. Search for and download “Mi-Cam Pro” if using iOS (Figure 1), or
“Mi-Cam” if using Android (Figure 2).
4. On your device, open “Settings”.
(iOS = Figure 3; Android = Figure 4.)
5. Select “Wi-Fi”.
6. Select “GSW_ _ _ _” (the numbers appearing after GSW may
vary), and connect. (iOS = Figure 5; Android = Figure 6.)
7. Open the downloaded Mi-Cam app on your device.
8. Enter Camera Wi-Fi Password: 12345678
9. On the Mi-Cam app, open settings (the gear icon) and select
Camera/Video Setting. (iOS = Figure 7; Android = Figure 8.)
10. On iOS, set to 25 fps, MPEG4, VGA.
On Android, set to MPEG4 VGA.
11. If on, turn audio off by touching “Audio”. (A red ‘x’ will appear on
feature.)
12. Use the buttons on the app to record video, or take still shots.
Video and stills are stored in your device’s gallery.
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5 Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
How to Set-Up & Use the WiFi Feature on Gen-Eye SDW & SDP Camera Systems