Safety Data Sheet

Safety Data Sheet
SNAKE-OIL / SNAKE-OIL CLASSIC
Date of issue: 2020-02-24, p. 6 of 9
concentrations are expected to exceed exposure limits. If adequate ventilation is not available or there is potential for
airborne exposure above the exposure limits, a respirator may be worn up to the respirator exposure limitations, check
with respirator equipment manufacturer's recommendations / limitations. For a higher level of protection, use
positive pressure supplied air respiration protection or Self-Contained Breathing Apparatus or if oxygen levels are
below 19.5% or are unknown.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance/form (physical state, color, etc.) Liquid, Clear and bright
Odor Mild Petroleum
Odor threshold No data available.
pH No data available.
Melting point/freezing point < -33 C / <-27 F
Initial boiling point and boiling range No data available.
Flash point > 196 C / > 384 F (COC)
Evaporation rate No data available.
Flammability (solid, gas) Class III-B
Upper/lower flammability limits No data available.
Upper/lower explosive limits No data available.
Vapor pressure 0.0 at 20 C
Vapor density No data available.
Relative density 0.855 –0.871
Solubility(ies) Negligible
Partition coefficient: n-octanol/water No data available.
Auto-ignition temperature No data available.
Decomposition temperature No data available.
Viscosity 22 –68 cSt at 40 C / 4.3 –8.7 cSt at 100 C
Explosive properties No data available.
Oxidizing properties No data available.
Other safety information
No data available.
SECTION 10: Stability and reactivity
10.1 Reactivity
None under normal use conditions.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
None under normal use conditions.
10.4 Conditions to avoid
Extended exposure to high temperatures can cause decomposition.
10.5 Incompatible materials
Isolate from strong oxidizing agents.
10.6 Hazardous decomposition products
Carbon Oxides, Nitrogen Oxides, Sulfur Oxides, Phosphorus Oxide, and Zinc Oxide from heating.
SECTION 11: Toxicological information