Replacement Part List

ManualsBrandsGeneral Pump ManualsAccessories24 in. 4000 psi 8 GPM Pressure Washer Flat Surface Cleaner with Casters

PROFESSIONAL FLAT SURFACE CLEANER

DCFSCP24GZ

OPERATOR’S MANUAL

General Pump is a

member of the

Interpump Group

WARNING: Read Before Operating Machine

Always wear protective eyewear

Keep clear of rotating nozzles

Never lock trigger gun open with any device

Drain water in cold weather to avoid freezing

Tampering with any part of this machine will void all warranties

FROM GENERAL PUMP

• COMPENSATING GUN FEATURE

• FULL 24” CLEANING PATH

• HEAVY-DUTY ANODIZED

ALUMINUM COMPONENTS

• RUGGED ABS COVER

• SWIVEL HAS GREASE ZERK

FOR BEARING LUBRICATION

AVAILABLE REPAIR KITS

Rotary Head Kit - Major:

P/N 2100372

Includes items 2, 3, 4, 5, 6, 7, 8, 9,

10, 11, 12, 13, 14, 15 and 17

Rotary Head Kit - Minor:

P/N 2100203

Includes items 9, 10, 15 and 17

Complete Rotary Head Kit:

P/N 2103220

Includes all items

Replacement Nozzles

For Arm 2103288:

P/N 925020M

(3 Required)

Ref 300988 Rev. B

07-17

Ref 300988 Rev. B

07-17

ITEM

NO.

PART

NO.

DESCRIPTION QTY.

1 2500010 HOUSING 1

2 2520030 RETAINER, BEARING 1

3 2520028 RETAINER, BEARING 1

4 2520027 SPACER, BEARING 2

5 2640004 BEARING 2

6 2701012 O-RING 1

7 2701011 O-RING 1

8 2701010 O-RING 1

9 2720007 SPRING 1

10 2530008 PIN 2

11 2530007 STEM, SMALL 1

12 2520029 SNAP RING 3

13 2710000 BACK UP RING 1

14 2520113 STEM 1

15 2200092 SCREW, M5 X 16 3

16 2200050 WASHER 3

17 2500012 RETAINER, BEARING 1

Photo of Rotary Head - Major

as assembled.

Summary of content (2 pages)

PAGE 1
AVAILABLE REPAIR KITS Rotary Head Kit - Major: P/N 2100372 Includes items 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 and 17 PROFESSIONAL FLAT SURFACE CLEANER Rotary Head Kit - Minor: P/N 2100203 Includes items 9, 10, 15 and 17 FROM GENERAL PUMP Complete Rotary Head Kit: P/N 2103220 Includes all items • COMPENSATING GUN FEATURE • FULL 24” CLEANING PATH Replacement Nozzles For Arm 2103288: P/N 925020M (3 Required) • HEAVY-DUTY ANODIZED ALUMINUM COMPONENTS • RUGGED ABS COVER • SWIVEL HAS GREASE ZER
PAGE 2
Operating Instructions 18 1. Bolt the two halves of the handle together with the two M6 x 60mm long bolts, nylok nuts and four washers. 2. Connect the handle to the brackets on the deck with the two 55mm long pins and rings. 3. Using thread sealant on hose’s male threads, connect the hose to the swivel on the deck. 4. Again, using thread sealant, attach the in-line filter to the inlet of the gun. 5. Connect inlet flter, D40014, to FSC gun inlet. 6. Connect to Pressure Washer. 7.