User Manual

Page 18
GENERAL PUMP
A member of the Interpump Group
KT SERIES
FOR KT24A, KT28A, KT30A, KT32A, , KT36A, KT40A:
9.9 Internal Diameter of the Hose Line
To determine the internal diameter of the hose, please refer to the following diagram.
Suction Hose
With a flow rate of ~105 GPM (400 l/mn) and water speed of 1 m/sec. the diagram line that connects the two scales
intersects the central scale, indicating the diameters, at a value of ~ 3.5 inch (90 mm).
Delivery Hose
With a flow rate of ~105 GPM (400 l/mn) and water speed of 5.5 m/sec. The diagram line that connects the two scales
intersects the central scale, indicating the diameters at a value of ~ 1.6 inch (40 mm).
Optimal speed to be obtained with the booster pump:
• Suction: ≤ 1 m/sec.
• Delivery: ≤ 5.5 m/sec.
The diagram does not take into account the hose and valve resistance, the pressure drop due to the pipe length,
the viscosity and the temperature of the pumped fluid. If necessary, contact our Customer Service Department.
Ref 300941 Rev.A
03-14