Repair Manual Owner's manual

GENERAL PUMP
A member of the Interpump Group
SM SERIES
Page 10
Slowly screw in the 3 M8 screws (1, fig. 24) to prevent the box from tilting too far and getting locked in the
housing. Remove the box while supporting the crankshaft to prevent damage (1, fig. 25).
Unscrew the bearing cover fixing screws from the opposite side (1, fig. 27).
Position the 3 grub screws or M8 threaded screws (1, fig. 23) with the function of extractors in the holes and
two sufficiently long M10 screws with the function of supporting the reduction gear box (2, fig. 23).
Ref 300894 Rev.A
06-12