Product Manual

ManualsBrandsGeneral Pump ManualsPressure Washer AccessoriesEasy Bolt-On Pressure Washer Pump — 3500 PSI, 4.0 GPM, Direct Drive, Gas

GENERAL PUMP

A member of the Interpump Group

TX Series 63 UI

Direct Drive Triplex Plunger Pump

SPECIFICATIONS

FEATURES

TRIPLEX

Pump Model

TX1508G8UI TX1509G8UI TX1510G8UI

Maximum Volume

3.0 GPM 3.5 GPM

4.0 GPM

Maximum Pressure

3000 PSI

Maximum RPM

3400 RPM

Maximum Inlet Pressure

125 PSI

Minimum Inlet Pressure

3 ft (2.6 in Hg) Positive Pressure

Maximum Fluid Temperature

165º F

Bore (in / mm)

.591 in / 15mm

Stroke (in / mm)

.315 in / 8 mm

.355 in / 9 mm

.394 in / 10 mm

Oil Capacity

14.0 oz

Inlet Port Thread

1/2”-14 BSP-F

Discharge Port Thread

3/8”-19 BSP-F

Shaft Diameter

1” - Hollow

Motor Flange

J609-b

Weight

18.2 lb

Dimensions - Inches - Nominal

11.3 x 9.5 x 9.1

Pump Model

TX1508G8UI TX1509G8UI TX1510G8UI

Recommended Nozzle Size #3.5 #4.0 #4.5

PSI at Recommended Nozzle 3000 3000 3000

PSI at .5 Size Larger 2250 2400 2400

PSI at 1.0 Size Larger 1750 1950 2000

PSI at 1.5 Sizes Larger 1400 1600 1750

PSI at 2.0 Sizes Larger 1150 1350 1500

PERFORMANCE*

* Values are theoretical. Actual performance may vary slightly depending on conditions

• Built-in Pressure Trapping Unloader and Injector

• Next Generation Packings for Exceptional Seal Life

• Solid White Ceramic Plungers

• Direct-Drive for Convenience and Durability

• Oversized Connecting Rods

General Pump

is a member of

the Interpump Group

Summary of content (4 pages)

PAGE 1
GENERAL PUMP A member of the Interpump Group TRIPLEX FEATURES • Built-in Pressure Trapping Unloader and Injector • Next Generation Packings for Exceptional Seal Life • Solid White Ceramic Plungers • Direct-Drive for Convenience and Durability • Oversized Connecting Rods SPECIFICATIONS Pump Model Maximum Volume Maximum Pressure TX1509G8UI TX1510G8UI 3.0 GPM 3.5 GPM 4.0 GPM 3000 PSI 3400 RPM Maximum Inlet Pressure 125 PSI Minimum Inlet Pressure 3 ft (2.
PAGE 2
Pcs. in kit Items included in kit Kit No.
PAGE 3
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 23 24 25 26 27 28 29 30 31 32 33 34 35 40 41 42 Part no. 63120641 99319200 96701400 701115 36200366 36200176 94737600 36202551 701002 98222600 36711501 99180700 50150074 44211801 90409700 91832900 90159500 63010022 98210300 63050066 63030022 90392000 63160022 99183700 701013 98204100 97733500 96707500 660024 701009 52040009 44211570 92221500 63080070 90360800 90260800 PART LIST Description Manifold, 15 mm, RH Screw, M8 x 65 Lockwasher, M8.
PAGE 4
GENERAL PUMP DIMENSIONS* (INCHES) A member of the Interpump Group J609b Models 9.2 8.2 .2 5.8 2.4 3.3 3.9 2.9 10.1 3.1 6.1 3.8 2.3 3.0 1.5 Ø 1.0 PER SAE J609b .22 6.8 5.9 4.3 90° 7.2 .25 .4 3/8 − F Ø 5.9 PER SAE J609b Ø 6.5 PER SAE 609B Ø 5.0 PER SAE J609b 3/8 − M OUTLET 10.4 1.1 Ø .3 2.5 6.5 4.8 CHEM .1 1/2 − M INLET 2.3 3.24 1/2 − F Ø .4 60° PER SAE J609b 5.4 6.5 9.2 9.